Y. Li, S. Kumar, G. Yang, J. Lu, Y. Yao et al., The contrast between monovalent and multivalent metal battery anodes. Science 389(6766), eadl5482 (2025). https://doi.org/10.1126/science.adl5482

X. Wang, Z. Chen, K. Jiang, M. Chen, S. Passerini, 3D host design strategies guiding “bottom–up” lithium deposition: a review. Adv. Energy Mater. 14(19), 2304229 (2024). https://doi.org/10.1002/aenm.202304229

P. Molaiyan, M. Abdollahifar, B. Boz, A. Beutl, M. Krammer et al., Optimizing current collector interfaces for efficient “anode-free” lithium metal batteries. Adv. Funct. Mater. 34(6), 2311301 (2024). https://doi.org/10.1002/adfm.202311301

X. Zhang, Y. Yang, Z. Zhou, Towards practical lithium-metal anodes. Chem. Soc. Rev. 49(10), 3040–3071 (2020). https://doi.org/10.1039/c9cs00838a

P. Shi, L.-P. Hou, C.-B. Jin, Y. Xiao, Y.-X. Yao et al., A successive conversion-deintercalation delithiation mechanism for practical composite lithium anodes. J. Am. Chem. Soc. 144(1), 212–218 (2022). https://doi.org/10.1021/jacs.1c08606

Y. Hu, Z. Chen, Y. Wang, H. Hou, B. Chen et al., Review of thin lithium metal battery anode fabrication–microstructure–electrochemistry relations. Adv. Mater. 38(12), e11817 (2026). https://doi.org/10.1002/adma.202511817

H. Kim, G. Jeong, Y.-U. Kim, J.-H. Kim, C.-M. Park et al., Metallic anodes for next generation secondary batteries. Chem. Soc. Rev. 42(23), 9011 (2013). https://doi.org/10.1039/c3cs60177c

S. Nanda, A. Gupta, A. Manthiram, Anode-free full cells: a pathway to high-energy density lithium-metal batteries. Adv. Energy Mater. 11(2), 2000804 (2021). https://doi.org/10.1002/aenm.202000804

C.-B. Jin, P. Shi, X.-Q. Zhang, J.-Q. Huang, Advances in carbon materials for stable lithium metal batteries. New Carbon Mater. 37(1), 1–24 (2022). https://doi.org/10.1016/S1872-5805(22)60573-0

H. Liu, X. Cheng, C. Yan, Z. Li, C. Zhao et al., A perspective on energy chemistry of low-temperature lithium metal batteries. iEnergy 1(1), 72–81 (2022). https://doi.org/10.23919/IEN.2022.0003

S. Feng, Z.-H. Fu, X. Chen, Q. Zhang, A review on theoretical models for lithium–sulfur battery cathodes. InfoMat 4(3), e12304 (2022). https://doi.org/10.1002/inf2.12304

Q. Zhu, J. Ma, S. Li, D. Mao, Solid-state electrolyte for lithium-air batteries: a review. Polymers 15(11), 2469 (2023). https://doi.org/10.3390/polym15112469

B. Horstmann, J. Shi, R. Amine, M. Werres, X. He et al., Strategies towards enabling lithium metal in batteries: interphases and electrodes. Energy Environ. Sci. 14(10), 5289–5314 (2021). https://doi.org/10.1039/d1ee00767j

C. Wei, L. Tan, Y. Zhang, Z. Wang, B. Xi et al., Review of room-temperature liquid metals for advanced metal anodes in rechargeable batteries. Energy Storage Mater. 50, 473–494 (2022). https://doi.org/10.1016/j.ensm.2022.05.024

L. Shen, P. Shi, X. Hao, Q. Zhao, J. Ma et al., Progress on lithium dendrite suppression strategies from the interior to exterior by hierarchical structure designs. Small 16(26), 2000699 (2020). https://doi.org/10.1002/smll.202000699

J.Y. Kim, O.B. Chae, M. Wu, E. Lim, G. Kim et al., Extraordinary dendrite-free Li deposition on highly uniform facet wrinkled Cu substrates in carbonate electrolytes. Nano Energy 82, 105736 (2021). https://doi.org/10.1016/j.nanoen.2020.105736

Q. Zhao, X. Chen, W. Hou, B. Ye, Y. Zhang et al., A facile, scalable, high stability Lithium metal anode. SusMat 2(1), 104–112 (2022). https://doi.org/10.1002/sus2.43

J.-F. Ding, R. Xu, X.-X. Ma, Y. Xiao, Y.-X. Yao et al., Quantification of the dynamic interface evolution in high-efficiency working Li-metal batteries. Angew. Chem. Int. Ed. 61(13), e202115602 (2022). https://doi.org/10.1002/anie.202115602

X. Shen, R. Zhang, X. Chen, X.-B. Cheng, X. Li et al., The failure of solid electrolyte interphase on Li metal anode: structural uniformity or mechanical strength? Adv. Energy Mater. 10(10), 1903645 (2020). https://doi.org/10.1002/aenm.201903645

S.-J. Zhang, Z.-W. Yin, Z.-Y. Wu, D. Luo, Y.-Y. Hu et al., Achievement of high-cyclability and high-voltage Li-metal batteries by heterogeneous SEI film with internal ionic conductivity/external electronic insulativity hybrid structure. Energy Storage Mater. 40, 337–346 (2021). https://doi.org/10.1016/j.ensm.2021.05.029

J. Liu, X. Hu, S. Qi, Y. Ren, Y. Li et al., Research progress in failure mechanisms and electrolyte modification of high-voltage nickel-rich layered oxide-based lithium metal batteries. InfoMat 6(2), e12507 (2024). https://doi.org/10.1002/inf2.12507

Q. Ran, Z. Song, J. Liu, L. Li, Q. Hu et al., Multifunctional and seamlessly integrated soft/rigid interphase realizing a stable lithium-metal anode for a high-performance lithium-metal battery under a lean electrolyte. ACS Sustain. Chem. Eng. 11(43), 15732–15742 (2023). https://doi.org/10.1021/acssuschemeng.3c05211

M. Li, C. Chen, H. Luo, Q. Xu, K. Yan et al., Constructing an inorganic-rich solid electrolyte interphase by adjusting electrolyte additives for stable Li metal anodes. J. Mater. Chem. A 12(17), 10072–10080 (2024). https://doi.org/10.1039/D3TA07655E

X. Yang, F. Cheng, Z. Yang, O. Ka, L. Wen et al., Multifunctionalizing electrolytes in situ for lithium metal batteries. Nano Energy 116, 108825 (2023). https://doi.org/10.1016/j.nanoen.2023.108825

H. Li, Y. Kang, W. Wei, C. Yan, X. Ma et al., Branch-chain-rich diisopropyl ether with steric hindrance facilitates stable cycling of lithium batteries at- 20 °C. Nano-Micro Lett. 16(1), 197 (2024). https://doi.org/10.1007/s40820-024-01419-z

J. You, Q. Wang, R. Wei, L. Deng, Y. Hu et al., Boosting high-voltage practical lithium metal batteries with tailored additives. Nano-Micro Lett. 16(1), 257 (2024). https://doi.org/10.1007/s40820-024-01479-1

Y.H. Jeong, G. Won, S. Kim, D. Jeong, D.-S. Kwon et al., Molecularly engineered artificial solid electrolyte interphase with tailored lithiophilicity and solvent-phobicity for stable lithium metal batteries. Small 21(24), 2411861 (2025). https://doi.org/10.1002/smll.202411861

C.H. Zhang, T. Jin, J. Liu, J. Ma, N.W. Li et al., In situ formed gradient composite solid electrolyte interphase layer for stable lithium metal anodes. Small 19(38), 2301523 (2023). https://doi.org/10.1002/smll.202301523

T. Shan, Z. Ju, D. Xiao, K. Yue, Z. Cui et al., Molecularly woven artificial solid electrolyte interphase. Angew. Chem. Int. Ed. 64(30), e202505056 (2025). https://doi.org/10.1002/anie.202505056

H. Kang, H. Kang, M. Lyu, E. Cho, A review of recent developments in the design of electrolytes and solid electrolyte interphase for lithium metal batteries. EcoMat 6(12), e12498 (2024). https://doi.org/10.1002/eom2.12498

H. Wang, M. Wu, J. He, G. Jiang, S. Qi et al., Highly Li+conductive artificial solid electrolyte interphase for lithium metal batteries. Energy Mater. Adv. 6, 105 (2025). https://doi.org/10.34133/energymatadv.0105

Z. Sun, J. Yang, H. Xu, C. Jiang, Y. Niu et al., Enabling an inorganic-rich interface via cationic surfactant for high-performance lithium metal batteries. Nano-Micro Lett. 16(1), 141 (2024). https://doi.org/10.1007/s40820-024-01364-x

M. Ma, M. Zhang, B. Jiang, Y. Du, B. Hu et al., A review of all-solid-state electrolytes for lithium batteries: high-voltage cathode materials, solid-state electrolytes and electrode–electrolyte interfaces. Mater. Chem. Front. 7(7), 1268–1297 (2023). https://doi.org/10.1039/D2QM01071B

W. Zhao, H. Wang, Q. Dong, H. Shao, Y. Zhang et al., Mechanical stable composite electrolyte for solid-state lithium metal batteries. Chem. Eng. J. 505, 159662 (2025). https://doi.org/10.1016/j.cej.2025.159662

Y. Song, M. Su, H. Xiang, J. Kang, W. Yu et al., PEO-based solid-state polymer electrolytes for wide-temperature solid-state lithium metal batteries. Small 21(3), 2408045 (2025). https://doi.org/10.1002/smll.202408045

Z. Xu, H. Huang, Q. Tang, H. Peng, J. Huang et al., Coaxially MXene-confined solid-state electrolyte for flexible high-rate lithium metal battery. Nano Energy 122, 109312 (2024). https://doi.org/10.1016/j.nanoen.2024.109312

Z. Chen, W. Zhao, Q. Liu, Y. Xu, Q. Wang et al., Janus quasi-solid electrolyte membranes with asymmetric porous structure for high-performance lithium-metal batteries. Nano-Micro Lett. 16(1), 114 (2024). https://doi.org/10.1007/s40820-024-01325-4

J. Meng, M. Yin, K. Guo, X. Zhou, Z. Xue, In situ polymerization in COF boosts Li-ion conduction in solid polymer electrolytes for Li metal batteries. Nano-Micro Lett. 17(1), 248 (2025). https://doi.org/10.1007/s40820-025-01768-3

Z. Ni, D. Yang, Y. Wang, W. Yang, B. Deng et al., The effect of alloy type of lithophilic Cu-Sn interface layer on the deposition/stripping behavior of lithium metal anode. J. Alloys Compd. 906, 164307 (2022). https://doi.org/10.1016/j.jallcom.2022.164307

Z. Ni, Y. Zhang, B. Zhu, Y. Wang, Y. Wang et al., A multifunctional Cu6Sn5 interface layer for dendritic-free lithium metal anode. J. Colloid Interface Sci. 605, 223–230 (2022). https://doi.org/10.1016/j.jcis.2021.07.108

Q. Wang, D. Yang, W. Xin, Y. Wang, W. Han et al., Modulation of desolvation barriers and inhibition of lithium dendrites based on lithophilic electrolyte additives for lithium metal anode. Chin. Chem. Lett. 36(6), 110669 (2025). https://doi.org/10.1016/j.cclet.2024.110669

D. Yang, X. Wang, Q. Wang, Y. Wang, W. Xin et al., Solvation structure and electron isolation synergy of piperidine ionic liquid additives inspires high performance lithium metal batteries. Energy Storage Mater. 72, 103719 (2024). https://doi.org/10.1016/j.ensm.2024.103719

L. Shan, B. Chen, Y. Hu, X. Gan, H. Si et al., In-situ functional crosslinking enables facile construction of rigid poly(ethylene oxide) network for high performance all-solid-state batteries. Aggregate 6(9), e70117 (2025). https://doi.org/10.1002/agt2.70117

A. Shao, X. Tang, M. Zhang, M. Bai, Y. Ma, Challenges, strategies, and prospects of the anode-free lithium metal batteries. Adv. Energy Sustain. Res. 3(4), 2100197 (2022). https://doi.org/10.1002/aesr.202100197

W.-Z. Huang, C.-Z. Zhao, P. Wu, H. Yuan, W.-E. Feng et al., Anode-free solid-state lithium batteries: a review. Adv. Energy Mater. 12(26), 2201044 (2022). https://doi.org/10.1002/aenm.202201044

K.B. Hatzell, Anode-less or anode-free? ACS Energy Lett. 8(11), 4775–4776 (2023). https://doi.org/10.1021/acsenergylett.3c02163

J.-A. Lee, H. Kang, S. Kim, K. Lee, J.H. Byun et al., Unveiling degradation mechanisms of anode-free Li-metal batteries. Energy Storage Mater. 73, 103826 (2024). https://doi.org/10.1016/j.ensm.2024.103826

H. Shi, F. Chu, Y. Zhang, Y. Liu, L. Hou et al., Anode-less Li-based metal batteries and beyond: challenges, strategies, and prospects. Mater. Today 83, 446–483 (2025). https://doi.org/10.1016/j.mattod.2025.01.002

S. Huo, L. Wang, B. Su, W. Xue, Y. Wang et al., Anode-free Li metal batteries: feasibility analysis and practical strategy. Adv. Mater. 36(47), e2411757 (2024). https://doi.org/10.1002/adma.202411757

N. Li, T. Jia, Y. Liu, Y. Ouyang, Y. Lv et al., Super-three-dimensional lithiophilic Cu-based current collector for anode-free lithium metal battery. Mater. Today Energy 36, 101341 (2023). https://doi.org/10.1016/j.mtener.2023.101341

S. Li, T. Chen, K. Kang, R. Guo, C. Liu et al., Progress and challenges for energy-dense and cost-effective anode-free lithium metal batteries. Energy Material Advances 6, 168 (2025). https://doi.org/10.34133/energymatadv.0168

S.E. Sandoval, C.G. Haslam, B.S. Vishnugopi, D.W. Liao, J.S. Yoon et al., Electro-chemo-mechanics of anode-free solid-state batteries. Nat. Mater. 24(5), 673–681 (2025). https://doi.org/10.1038/s41563-024-02055-z

K.N. Shitaw, Y. Nikodimos, T.M. Hagos, E. Balajig Tamilarasan, B.W. Taklu et al., Failure mechanisms and scalability of anode-free lithium-metal and lithium–sulfur batteries. Nat. Rev. Clean Technol. 2(1), 19–37 (2026). https://doi.org/10.1038/s44359-025-00120-7

C.-H. Jo, K.-S. Sohn, S.-T. Myung, Feasible approaches for anode-free lithium-metal batteries as next generation energy storage systems. Energy Storage Mater. 57, 471–496 (2023). https://doi.org/10.1016/j.ensm.2023.02.040

S. Liu, K. Jiao, J. Yan, Prospective strategies for extending long-term cycling performance of anode-free lithium metal batteries. Energy Storage Mater. 54, 689–712 (2023). https://doi.org/10.1016/j.ensm.2022.11.021

B. Wu, C. Chen, L.H.J. Raijmakers, J. Liu, D.L. Danilov et al., Li-growth and SEI engineering for anode-free Li-metal rechargeable batteries: a review of current advances. Energy Storage Mater. 57, 508–539 (2023). https://doi.org/10.1016/j.ensm.2023.02.036

M. Abdollahifar, A. Paolella, Anode-free batteries: the energy density prize and the stability paradox. ACS Energy Lett. 11(2), 1323–1348 (2026). https://doi.org/10.1021/acsenergylett.5c03401

R. Schmuch, R. Wagner, G. Hörpel, T. Placke, M. Winter, Performance and cost of materials for lithium-based rechargeable automotive batteries. Nat. Energy 3(4), 267–278 (2018). https://doi.org/10.1038/s41560-018-0107-2

Y. Zheng, Y. Shen, J. Guo, J. Li, J. Wang et al., Recent advances in solid-state lithium batteries based on anode engineering. Nano Res. Energy 3(3), e9120118 (2024). https://doi.org/10.26599/nre.2024.9120118

J. Xiao, Q. Li, Y. Bi, M. Cai, B. Dunn et al., Understanding and applying coulombic efficiency in lithium metal batteries. Nat. Energy 5(8), 561–568 (2020). https://doi.org/10.1038/s41560-020-0648-z

J. Chen, X. Xu, Q. He, Y. Ma, Advanced current collectors for alkali metal anodes. Chem. Res. Chin. Univ. 36(3), 386–401 (2020). https://doi.org/10.1007/s40242-020-0098-y

D. Li, B. Chen, H. Hu, W.-Y. Lai, Constructing 3D porous current collectors for stable and dendrite-free lithium metal anodes. Adv. Sustain. Syst. 6(5), 2200010 (2022). https://doi.org/10.1002/adsu.202200010

J. Wang, L. Li, H. Hu, H. Hu, Q. Guan et al., Toward dendrite-free metallic lithium anodes: from structural design to optimal electrochemical diffusion kinetics. ACS Nano 16(11), 17729–17760 (2022). https://doi.org/10.1021/acsnano.2c08480

X.-R. Chen, C. Yan, J.-F. Ding, H.-J. Peng, Q. Zhang, New insights into “dead lithium” during stripping in lithium metal batteries. J. Energy Chem. 62, 289–294 (2021). https://doi.org/10.1016/j.jechem.2021.03.048

S. Zhang, J. Zeng, Y. Ma, Y. Zhao, Y. Qian et al., Ultrathin hierarchical porous Cu current collector fabricated by anodic oxidation in complexing agent system for stable anode-free lithium metal batteries. Electrochim. Acta 442, 141895 (2023). https://doi.org/10.1016/j.electacta.2023.141895

B. Zhou, A. Bonakdarpour, I. Stoševski, B. Fang, D.P. Wilkinson, Modification of Cu current collectors for lithium metal batteries–A review. Prog. Mater. Sci. 130, 100996 (2022). https://doi.org/10.1016/j.pmatsci.2022.100996

Z.T. Wondimkun, W.A. Tegegne, S.-K. Jiang, C.-J. Huang, N.A. Sahalie et al., Highly-lithiophilic Ag@PDA-GO film to suppress dendrite formation on Cu substrate in anode-free lithium metal batteries. Energy Storage Mater. 35, 334–344 (2021). https://doi.org/10.1016/j.ensm.2020.11.023

Y. Liu, D. Gao, H. Xiang, X. Feng, Y. Yu, Research progress on copper-based current collector for lithium metal batteries. Energy Fuels 35(16), 12921–12937 (2021). https://doi.org/10.1021/acs.energyfuels.1c02008

B.-K. Cho, S.-H. Huh, S.H. Kim, S. Yu, J.-S. Bae et al., Long cycle-life aqueous Zn battery enabled by facile carbon nanotube coating on Cu current collector. Carbon Energy 6(6), e441 (2024). https://doi.org/10.1002/cey2.441

J. Xing, T. Chen, L. Yi, Z. Wang, Z. Song et al., Endowing Cu foil self-wettable in molten lithium: a roll-to-roll wet coating strategy to fabricate high-performance ultrathin lithium metal anodes. Energy Storage Mater. 63, 103067 (2023). https://doi.org/10.1016/j.ensm.2023.103067

X. Liu, K. Long, S. Huang, P. Xiao, C. Ling et al., Fluorinated carbon coating derived hydrophobic and dendrite-free lithium metal anode. J. Power. Sources 612, 234843 (2024). https://doi.org/10.1016/j.jpowsour.2024.234843

H. Kwon, J.-H. Lee, Y. Roh, J. Baek, D.J. Shin et al., An electron-deficient carbon current collector for anode-free Li-metal batteries. Nat. Commun. 12(1), 5537 (2021). https://doi.org/10.1038/s41467-021-25848-1

L. Dong, S. Zhong, B. Yuan, Y. Li, J. Liu et al., Reconstruction of solid electrolyte interphase with SrI2 reactivates dead Li for durable anode-free Li-metal batteries. Angew. Chem. Int. Ed. 62(23), e202301073 (2023). https://doi.org/10.1002/anie.202301073

K. Lee, Y.J. Lee, M.J. Lee, J. Han, J. Lim et al., A 3D hierarchical host with enhanced sodiophilicity enabling anode-free sodium-metal batteries. Adv. Mater. 34(14), 2270111 (2022). https://doi.org/10.1002/adma.202270111

D. Zhang, A. Dai, B. Fan, Y. Li, K. Shen et al., Three-dimensional ordered macro/mesoporous Cu/Zn as a lithiophilic current collector for dendrite-free lithium metal anode. ACS Appl. Mater. Interfaces 12(28), 31542–31551 (2020). https://doi.org/10.1021/acsami.0c09503

Y. Ma, X. Ma, J. Bai, W. Xu, H. Zhong et al., Electrochemically dealloyed 3D porous copper nanostructure as anode current collector of Li-metal batteries. Small 19(28), 2301731 (2023). https://doi.org/10.1002/smll.202301731

H. Wang, Y. Mao, P. Xu, Y. Ding, H. Yang et al., Scalable copper current collectors with precisely engineered lithiophilic alloy “skins” for durable lithium-metal batteries. Energy Environ. Sci. 18(5), 2622–2633 (2025). https://doi.org/10.1039/D4EE05862C

Y. Ma, G. Zhang, X. Ma, Z. Liu, H. Chen, Electrochemically dealloyed 3D porous copper nanostructure as high-performance anode current collector of Li-metal batteries. Meet. Abstr. MA2022–02(4), 371 (2022). https://doi.org/10.1149/ma2022-024371mtgabs

P. Qing, Z. Wu, Y. Chen, F. Tang, H. Yang et al., Powder metallurgical 3D nickel current collectors with plasma-induced Ni3N nanocoatings enabling long-life and dendrite-free lithium metal anode. J. Energy Chem. 72, 149–157 (2022). https://doi.org/10.1016/j.jechem.2022.05.020

Z. Qiang, B. Liu, B. Yang, P. Ma, X. Yan et al., Preparation of three-dimensional copper-zinc alloy current collector by powder metallurgy for lithium metal battery anode. ChemElectroChem 8(13), 2479–2487 (2021). https://doi.org/10.1002/celc.202100561

K. Qin, J. Baucom, D. Liu, W. Shi, N. Zhao et al., A powder metallurgic approach toward high-performance lithium metal anodes. Small 16(24), e2000794 (2020). https://doi.org/10.1002/smll.202000794

G.G. Carvalho, R.E. do Nascimento, M.T. Silva, M. de Fátima Montemor, Highly porous NiFe nanofoams synthesized by dynamic hydrogen bubble template for hydrogen evolution in alkaline media. Small Struct. 6(7), 2400591 (2025). https://doi.org/10.1002/sstr.202400591

H. Qiu, T. Tang, M. Asif, X. Huang, Y. Hou, 3D porous Cu current collectors derived by hydrogen bubble dynamic template for enhanced Li metal anode performance. Adv. Funct. Mater. 29(19), 1808468 (2019). https://doi.org/10.1002/adfm.201808468

E. Hassanizadeh, M. Mirjalili, M.H. Moayed, G. Barati Darband, Ultra-fast electrodeposition of dynamic hydrogen bubble template nickel sulfide on a porous copper layer as an electrocatalyst toward hydrogen evolution reaction. Int. J. Hydrogen Energy 55, 729–739 (2024). https://doi.org/10.1016/j.ijhydene.2023.10.247

D. Callegari, L. Airoldi, R. Brucculeri, U. Anselmi Tamburini, E. Quartarone, Extrusion 3D printing of patterned Cu current collectors for advanced lithium metal anodes. Batteries Supercaps 6(9), e202300202 (2023). https://doi.org/10.1002/batt.202300202

M. Cheng, K. Tang, Z. Yang, M. Zhao, W. Duan et al., Regulating lithium deposition via 3D printed current collectors with dual-scale roughness. ACS Appl. Mater. Interfaces 17(23), 33869–33877 (2025). https://doi.org/10.1021/acsami.5c02407

A.C. Martinez, A. Maurel, B. Yelamanchi, A.A. Talin, S. Grugeon et al., Combining 3D printing of copper current collectors and electrophoretic deposition of electrode materials for structural lithium-ion batteries. Adv. Manuf. 13(2), 462–475 (2025). https://doi.org/10.1007/s40436-024-00514-z

G. Saeed, T. Kang, J.S. Byun, D. Min, J.S. Kim et al., Two-dimensional (2D) materials for 3D printed micro-supercapacitors and micro-batteries. Energy Mater. 4(2), 400023 (2024). https://doi.org/10.20517/energymater.2023.81

Y. Wang, Z. Zhao, J. Zhong, T. Wang, L. Wang et al., Hierarchically micro/nanostructured current collectors induced by ultrafast femtosecond laser strategy for high-performance lithium-ion batteries. Energy Environ. Mater. 5(3), 969–976 (2022). https://doi.org/10.1002/eem2.12223

E. Ravesio, G. Montinaro, G. Mincuzzi, M. Negozio, D. Versaci et al., Ultrashort pulsed laser texturing of current collector for Si/C Li-ion anodes: characterization of electrochemical performance and evolution of interface morphology. J. Energy Storage 109, 115226 (2025). https://doi.org/10.1016/j.est.2024.115226

H. Kim, J. Lee, H. Kong, T. Park, T.S. Kim et al., Laser-printed photoanode: femtosecond laser-induced crystalline phase transformation of WO3 nanorods for space-efficient and flexible thin-film solar water-splitting cells. Small 20(37), 2402051 (2024). https://doi.org/10.1002/smll.202402051

S. Zhou, Y. Liu, Z. Ma, Z. Huang, H. Cao et al., Anode-free lithium metal batteries with enhanced durability: magnetron-sputtered lithiophilic bimetallic coatings on Cu current collectors. Chem. Eng. J. 522, 167522 (2025). https://doi.org/10.1016/j.cej.2025.167522

X. Yang, Y. Shen, L. Zhang, Y. Li, Recent advances in the application of magnetron sputtering for lithium metal batteries. J. Mater. Chem. A 13(39), 33104–33135 (2025). https://doi.org/10.1039/D5TA03766B

Y. Peng, X. Feng, Z. Zhu, J. Xia, W. Zhang et al., Study on the commercial metalized plastic current collector PET-Cu and PP-Cu toward high-energy lithium-ion battery. Small 20(49), 2405534 (2024). https://doi.org/10.1002/smll.202405534

X. Zhang, L. Huang, G. Yang, J. Song, G. Cong et al., Dual modification of current collector for high-performance lithium metal batteries by laser etching. Electrochim. Acta 498, 144633 (2024). https://doi.org/10.1016/j.electacta.2024.144633

S. Remesh, M. Vasudevan, V. Perumal, T.N.J.I. Edison, P.B. Raja et al., Study on current collector and electrolyte design/electrochemical behaviour of an in-plane lignin derived laser scribed graphene for microsupercapacitor application. Ain Shams Eng. J. 15(9), 102889 (2024). https://doi.org/10.1016/j.asej.2024.102889

Y. He, S. Chen, L. Nie, Z. Sun, X. Wu et al., Stereolithography three-dimensional printing solid polymer electrolytes for all-solid-state lithium metal batteries. Nano Lett. 20(10), 7136–7143 (2020). https://doi.org/10.1021/acs.nanolett.0c02457

H. Kim, H. Lee, G.H. Kwon, J. Kim, D. Jeong et al., Iron as a sulfidation-resistant current collector for negative electrode in sulfide-based all-solid-batteries. Small 21(5), 2409523 (2025). https://doi.org/10.1002/smll.202409523

X. Lin, P. Apostol, H. Xu, V.R. Bakuru, X. Guo et al., Design principles of quinone redox systems for advanced sulfide solid-state organic lithium metal batteries. Adv. Mater. 36(32), 2312908 (2024). https://doi.org/10.1002/adma.202312908

K. Lin, T. Li, S.-W. Chiang, M. Liu, X. Qin et al., Facile synthesis of ant-nest-like porous duplex copper as deeply cycling host for lithium metal anodes. Small 16(37), e2001784 (2020). https://doi.org/10.1002/smll.202001784

G. Zhou, A. Yang, G. Gao, X. Yu, J. Xu et al., Supercooled liquid sulfur maintained in three-dimensional current collector for high-performance Li-S batteries. Sci. Adv. 6(21), eaay5098 (2020). https://doi.org/10.1126/sciadv.aay5098

H.-Y. Ho, K.-Y. Lin, T.-H. Tsai, M.-C. Lin, A study on metallic current collectors for operando X-ray diffraction characterization of aluminum-sulfur batteries. J. Energy Storage 124, 116900 (2025). https://doi.org/10.1016/j.est.2025.116900

K. Zhong, Y. Xue, W. Huang, X. Hou, K. Yang et al., The cyclized polyacrylonitrile coating current collector for directional deposition of lithium metal induced by Zn nanosheets. Electrochim. Acta 517, 145777 (2025). https://doi.org/10.1016/j.electacta.2025.145777

V.V.K. Lanjapalli, S. Hosseini, H.-J. Dai, C.-L. Huang, Y.-S. Chen et al., Various advanced permeable substrates for lithium infusion in lithium metal batteries: a review of recent developments. Chem. Eng. J. 425, 131236 (2021). https://doi.org/10.1016/j.cej.2021.131236

X. Yan, L. Lin, Q. Chen, Q. Xie, B. Qu et al., Multifunctional roles of carbon-based hosts for Li-metal anodes: a review. Carbon Energy 3(2), 303–329 (2021). https://doi.org/10.1002/cey2.95

X.-H. Zhang, T. Xie, D.-B. Kong, L.-J. Zhi, Carbon-based materials for advanced lithium metal batteries based on carbon units of different dimensions. New Carbon Mater. 38(4), 583–595 (2023). https://doi.org/10.1016/S1872-5805(23)60768-1

J.-Y. Song, J. Yoon, J. Suk, M. Wu, H.-T. Jung, Highly loaded gold (Au) nanoseeds with uniform distribution on 3D carbon foam for long-cycle lithium-metal batteries. J. Mater. Chem. A 11(30), 16153–16158 (2023). https://doi.org/10.1039/D3TA03043A

Y. Liu, C. Cui, L. Deng, Z. Wang, L. Dong et al., Magnesium anchoring strategy for stabilizing graphene-hosted lithium metal battery. Small Struct. 5(2), 2300345 (2024). https://doi.org/10.1002/sstr.202300345

J. Ma, J. Yang, Y. Zhao, Q. Ma, Z. Wang et al., Janus-faced graphene substrate stabilizes lithium metal anode. Chem. Eng. J. 433, 133561 (2022). https://doi.org/10.1016/j.cej.2021.133561

L.J. Lopez, R.M. Ospino, R.V. Pinto, J. Castro-Gutiérrez, G. Mouchaham et al., Post-hybridization of MIL-101(Cr) with graphene oxide enhances its hydrogen storage and release capacities. Energy Mater. 5(12), 500156 (2025). https://doi.org/10.20517/energymater.2025.101

N. Çakmakçı, H. Kang, J. Moon, H. Jung, B. Yoo et al., Lithium-embedded carbon nanotube/graphite composite anode for lithium metal battery. J. Energy Storage 89, 111618 (2024). https://doi.org/10.1016/j.est.2024.111618

M. Wang, Z. Ren, Z. Chen, H. Lin, J. Yan et al., A multifunctional subassembly of carbon nanotube paper for stable lithium metal anodes. Mater. Today Energy 29, 101134 (2022). https://doi.org/10.1016/j.mtener.2022.101134

H. Hwang, S.H. Jeong, H.-J. Choi, D. Baek, D. Lee et al., Fiber-reinforced CNT-integrated quartz fabrics as multifunctional electrodes for structural lithium-ion batteries. Energy Mater. 5(12), 500155 (2025). https://doi.org/10.20517/energymater.2025.88

R. Pathak, K. Chen, F. Wu, A.U. Mane, R.V. Bugga et al., Advanced strategies for the development of porous carbon as a Li host/current collector for lithium metal batteries. Energy Storage Mater. 41, 448–465 (2021). https://doi.org/10.1016/j.ensm.2021.06.015

H. Qutaish, S.A. Han, Y. Rehman, K. Konstantinov, M.-S. Park et al., Porous carbon architectures with different dimensionalities for lithium metal storage. Sci. Technol. Adv. Mater. 23(1), 169–188 (2022). https://doi.org/10.1080/14686996.2022.2050297

R. Zhang, X. Chen, X. Shen, X.-Q. Zhang, X.-R. Chen et al., Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries. Joule 2(4), 764–777 (2018). https://doi.org/10.1016/j.joule.2018.02.001

C. Niu, H. Pan, W. Xu, J. Xiao, J.-G. Zhang et al., Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions. Nat. Nanotechnol. 14(6), 594–601 (2019). https://doi.org/10.1038/s41565-019-0427-9

Y. Ouyang, S. Huang, N. Li, S. Lu, Y. Lv et al., Carbon cloth with lithiophilic carbon-coated ZnO nanotubes as anode current collector for hybrid lithium ion/lithium metal battery. Carbon 229, 119452 (2024). https://doi.org/10.1016/j.carbon.2024.119452

S. Zhang, S. Xiao, D. Li, J. Liao, F. Ji et al., Commercial carbon cloth: an emerging substrate for practical lithium metal batteries. Energy Storage Mater. 48, 172–190 (2022). https://doi.org/10.1016/j.ensm.2022.03.014

T. Ma, L. Zhang, Y. Tan, P. Zhou, X. Liu et al., Multiscale free-standing graphene-based scaffolds enabling advanced high-energy and dendrite-free lithium metal anodes. J. Energy Storage 93, 112283 (2024). https://doi.org/10.1016/j.est.2024.112283

J. Kim, J. Choi, P.J. Kim, A new approach to stabilize the electrochemical performance of Li metal batteries through the structure alteration of CNT scaffolds. Carbon 203, 426–435 (2023). https://doi.org/10.1016/j.carbon.2022.11.101

H. Kim, Y. Son, C. Jo, Free-standing carbon materials for lithium metal batteries. ChemElectroChem 11(18), e202400209 (2024). https://doi.org/10.1002/celc.202400209

S.-B. Xiang, Y. Fu, C. Yin, Y. Hou, H. Tian et al., Advances in research on the inhibitory effect of 3D current collector structures for lithium dendrites. Inorg. Chem. Front. 10(23), 6767–6791 (2023). https://doi.org/10.1039/d3qi01290e

L. Xu, Q. Zhang, S. Niu, X. Wang, Q. Lian et al., Organic eutectic mixture incorporated with graphene oxide sheets as lithiophilic artificial protective layer for dendrite-free lithium metal batteries. Adv. Energy Mater. 13(12), 2204214 (2023). https://doi.org/10.1002/aenm.202204214

X. Chen, X.-R. Chen, T.-Z. Hou, B.-Q. Li, X.-B. Cheng et al., Lithiophilicity chemistry of heteroatom-doped carbon to guide uniform lithium nucleation in lithium metal anodes. Sci. Adv. 5(2), eaau7728 (2019). https://doi.org/10.1126/sciadv.aau7728

Z. Jiang, C. Meng, G. Chen, R. Yuan, A. Li et al., Lithiophilic onion-like carbon spheres as lithium metal uniform deposition host. J. Colloid Interface Sci. 627, 783–792 (2022). https://doi.org/10.1016/j.jcis.2022.07.054

J. Zhu, C. Kang, X. Xiao, Y. Mao, Y. Luo et al., Regulating local chemical softness of the collector to homogenize Li deposition for anode-free Li-metal batteries. Energy Environ. Sci. 17(23), 9323–9334 (2024). https://doi.org/10.1039/d4ee03673e

K. Cai, G. Zhong, H. Zheng, G. Kang, R. Yin et al., Facile electroless plating method to fabricate a nickel–phosphorus-modified copper current collector for a lean lithium-metal anode. ACS Appl. Mater. Interfaces 14(40), 45433–45443 (2022). https://doi.org/10.1021/acsami.2c13359

Z. Huang, Z. Wang, X. Wang, S. Zhang, T. Xu et al., Hierarchical nanostructure of three-dimensional Au/carbon nanotube-graphene foam for high performance lithium metal anode. Solid State Ionics 380, 115941 (2022). https://doi.org/10.1016/j.ssi.2022.115941

Y. Zhao, L. Wang, J. Zou, Q. Ran, L. Li et al., Bottom-up lithium growth guided by Ag concentration gradient in 3D PVDF framework towards stable lithium metal anode. J. Energy Chem. 65, 666–673 (2022). https://doi.org/10.1016/j.jechem.2021.06.027

Y. Jin, L.-X. Zhou, Z.-J. Zhu, F. Cao, F.-F. Guo et al., Bimetallic Zn@In microspheres with high lithiophilicity and conductivity for uniform Li deposition in long-life Li metal batteries. J. Power. Sources 651, 237537 (2025). https://doi.org/10.1016/j.jpowsour.2025.237537

Y. Liu, L. Lin, Y. Sun, J. Zhao, W. Liu et al., Lithiophilic 3D scaffold orienteering induced Li uniform deposition for highly stable lithium metal batteries. J. Phys. Chem. Solids 192, 112078 (2024). https://doi.org/10.1016/j.jpcs.2024.112078

S. Zhang, W. Deng, X. Zhou, B. He, J. Liang et al., Controlled lithium plating in three-dimensional hosts through nucleation overpotential regulation toward high-areal-capacity lithium metal anode. Mater. Today Energy 21, 100770 (2021). https://doi.org/10.1016/j.mtener.2021.100770

G.-D. Yang, Y. Liu, X. Ji, S.-M. Zhou, Z. Wang et al., Structural design of 3D current collectors for lithium metal anodes: a review. Chemistry Eur. J. 30(21), e202304152 (2024). https://doi.org/10.1002/chem.202304152

T. Wei, J. Lu, M. Wang, C. Sun, Q. Zhang et al., MOF-derived materials enabled lithiophilic 3D hosts for lithium metal anode: a review. Chin. J. Chem. 41(15), 1861–1874 (2023). https://doi.org/10.1002/cjoc.202200816

C. Lu, M. Tian, X. Zheng, C. Wei, M.H. Rummeli et al., Cotton pad derived 3D lithiophilic carbon host for robust Li metal anode: in-situ generated ionic conductive Li3N protective decoration. Chem. Eng. J. 430, 132722 (2022). https://doi.org/10.1016/j.cej.2021.132722

J. Liu, H. Ma, Z. Wen, H. Li, J. Yang et al., Layered Ag-graphene films synthesized by Gamma ray irradiation for stable lithium metal anodes in carbonate-based electrolytes. J. Energy Chem. 64, 354–363 (2022). https://doi.org/10.1016/j.jechem.2021.04.044

X. Jia, M. Wang, S. Chen, C. Cui, J. Zhu, Strategy utilizing lithiophilic gradients for dendrite-free lithium metal battery. Chem. Eng. J. 510, 161788 (2025). https://doi.org/10.1016/j.cej.2025.161788

C. Gao, J. Kang, Y. Zhang, C. He, C. Shi et al., Advances in anode current collectors with a lithiophilic gradient for lithium metal batteries. Chem. Commun. 60(69), 9130–9148 (2024). https://doi.org/10.1039/d4cc02324b

L. Cheng, J. Liu, Y. Wang, H. Wang, A. Shao et al., Lithiophilic-gradient, Li+ supplementary interphase design for lean lithium metal batteries. Adv. Mater. 37(14), e2420255 (2025). https://doi.org/10.1002/adma.202420255

B. Sun, Q. Zhang, W. Xu, R. Zhao, H. Zhu et al., A gradient topology host for a dendrite-free lithium metal anode. Nano Energy 94, 106937 (2022). https://doi.org/10.1016/j.nanoen.2022.106937

A. Pei, G. Zheng, F. Shi, Y. Li, Y. Cui, Nanoscale nucleation and growth of electrodeposited lithium metal. Nano Lett. 17(2), 1132–1139 (2017). https://doi.org/10.1021/acs.nanolett.6b04755

P. Biswal, S. Stalin, A. Kludze, S. Choudhury, L.A. Archer, Nucleation and early stage growth of Li electrodeposits. Nano Lett. 19(11), 8191–8200 (2019). https://doi.org/10.1021/acs.nanolett.9b03548

D. Kashchiev, On the relation between nucleation work, nucleus size, and nucleation rate. J. Chem. Phys. 76(10), 5098–5102 (1982). https://doi.org/10.1063/1.442808

D.W. Oxtoby, D. Kashchiev, A general relation between the nucleation work and the size of the nucleus in multicomponent nucleation. J. Chem. Phys. 100(10), 7665–7671 (1994). https://doi.org/10.1063/1.466859

P. Zou, Y. Sui, H. Zhan, C. Wang, H.L. Xin et al., Polymorph evolution mechanisms and regulation strategies of lithium metal anode under multiphysical fields. Chem. Rev. 121(10), 5986–6056 (2021). https://doi.org/10.1021/acs.chemrev.0c01100

D.R. Ely, R.E. García, Heterogeneous nucleation and growth of lithium electrodeposits on negative electrodes. J. Electrochem. Soc. 160(4), A662–A668 (2013). https://doi.org/10.1149/1.057304jes

Y. Chen, Y. Luo, H. Zhang, C. Qu, H. Zhang et al., The challenge of lithium metal anodes for practical applications. Small Meth. 3(7), 1800551 (2019). https://doi.org/10.1002/smtd.201800551

J. Chazalviel, Electrochemical aspects of the generation of ramified metallic electrodeposits. Phys. Rev. A 42(12), 7355–7367 (1990). https://doi.org/10.1103/physreva.42.7355

X. He, K. Zhang, Z. Zhu, Z. Tong, X. Liang, 3D-hosted lithium metal anodes. Chem. Soc. Rev. 53(1), 9–24 (2024). https://doi.org/10.1039/d3cs00495c

B.S. Kausthubharam, A.S.J. Vishnugopi, V. Alujjage, W.S.T. Premnath et al., Mechanistic understanding of thermal stability and safety in lithium metal batteries. Chem. Rev. 126(1), 404–447 (2026). https://doi.org/10.1021/acs.chemrev.5c00621

X. Yu, A. Manthiram, Electrode–electrolyte interfaces in lithium-based batteries. Energy Environ. Sci. 11(3), 527–543 (2018). https://doi.org/10.1039/c7ee02555f

E. Peled, Film forming reaction at the lithium/electrolyte interface. J. Power. Sources 9(3), 253–266 (1983). https://doi.org/10.1016/0378-7753(83)87026-8

D. Aurbach, A. Zaban, A. Schechter, Y. Ein-Eli, E. Zinigrad et al., The study of electrolyte solutions based on ethylene and diethyl carbonates for rechargeable Li batteries: I. Li metal anodes. J. Electrochem. Soc. 142(9), 2873–2882 (1995). https://doi.org/10.1149/1.2048658

L.A. Huff, H. Tavassol, J.L. Esbenshade, W. Xing, Y.-M. Chiang et al., Identification of Li-ion battery SEI compounds through 7Li and 13C solid-state MAS NMR spectroscopy and MALDI-TOF mass spectrometry. ACS Appl. Mater. Interfaces 8(1), 371–380 (2016). https://doi.org/10.1021/acsami.5b08902

E. Peled, D. Golodnitsky, G. Ardel, Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes. J. Electrochem. Soc. 144(8), L208–L210 (1997). https://doi.org/10.1149/1.1837858

D. Aurbach, B. Markovsky, A. Shechter, Y. Ein-Eli, H. Cohen, A comparative study of synthetic graphite and Li electrodes in electrolyte solutions based on ethylene carbonate-dimethyl carbonate mixtures. J. Electrochem. Soc. 143(12), 3809–3820 (1996). https://doi.org/10.1149/1.1837300

J. Lee, S.H. Jeong, J.S. Nam, M. Sagong, J. Ahn et al., Toward thin and stable anodes for practical lithium metal batteries: a review, strategies, and perspectives. EcoMat 5(12), e12416 (2023). https://doi.org/10.1002/eom2.12416

K. Leung, K.L. Jungjohann, Spatial heterogeneities and onset of passivation breakdown at lithium anode interfaces. J. Phys. Chem. C 121(37), 20188–20196 (2017). https://doi.org/10.1021/acs.jpcc.7b06983

K.J. Harry, K. Higa, V. Srinivasan, N.P. Balsara, Influence of electrolyte modulus on the local current density at a dendrite tip on a lithium metal electrode. J. Electrochem. Soc. 163(10), A2216–A2224 (2016). https://doi.org/10.1149/2.0191610jes

A. Lahiri, A. Choudhury, Dendrite tip selection during isothermal free growth in multi-component alloys: marginal stability theories and insights from phase-field simulations. Comput. Mater. Sci. 158, 209–218 (2019). https://doi.org/10.1016/j.commatsci.2018.11.028

E. Peled, S. Menkin, Review: SEI: past, present and future. J. Electrochem. Soc. 164(7), A1703–A1719 (2017). https://doi.org/10.1149/2.1441707jes

C. Monroe, J. Newman, Dendrite growth in lithium/polymer systems. J. Electrochem. Soc. 150(10), A1377 (2003). https://doi.org/10.1149/1.1606686

M. Rosso, E. Chassaing, J.N. Chazalviel, T. Gobron, Onset of current-driven concentration instabilities in thin cell electrodeposition with small inter-electrode distance. Electrochim. Acta 47(8), 1267–1273 (2002). https://doi.org/10.1016/S0013-4686(01)00848-9

C.-P. Yang, Y.-X. Yin, S.-F. Zhang, N.-W. Li, Y.-G. Guo, Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes. Nat. Commun. 6, 8058 (2015). https://doi.org/10.1038/ncomms9058

F. Ding, W. Xu, G.L. Graff, J. Zhang, M.L. Sushko et al., Dendrite-free lithium deposition via self-healing electrostatic shield mechanism. J. Am. Chem. Soc. 135(11), 4450–4456 (2013). https://doi.org/10.1021/ja312241y

Y.S. Cohen, Y. Cohen, D. Aurbach, Micromorphological studies of lithium electrodes in alkyl carbonate solutions using in situ atomic force microscopy. J. Phys. Chem. B 104(51), 12282–12291 (2000). https://doi.org/10.1021/jp002526b

A.B. Gunnarsdóttir, C.V. Amanchukwu, S. Menkin, C.P. Grey, Noninvasive in situ NMR study of “dead lithium” formation and lithium corrosion in full-cell lithium metal batteries. J. Am. Chem. Soc. 142(49), 20814–20827 (2020). https://doi.org/10.1021/jacs.0c10258

D. Lin, Y. Liu, Y. Cui, Reviving the lithium metal anode for high-energy batteries. Nat. Nanotechnol. 12(3), 194–206 (2017). https://doi.org/10.1038/nnano.2017.16

M. Abdollahifar, A. Paolella, “Dead lithium” formation and mitigation strategies in anode-free Li-metal batteries. Batteries Supercaps 8(3), e202400505 (2025). https://doi.org/10.1002/batt.202400505

S. Liu, X. Lin, H. ji, K. Huang, Y. Yu et al., Anomalous temperature dependence of lithium deposition/stripping process in ether-based anode-free lithium metal batteries. Small Methods 10(1), e01911 (2026). https://doi.org/10.1002/smtd.202501911

H. Yoon, D. Kim, C. Choi, J.-M. Oh, J. Shin et al., Unveiling the hidden interface: pre-SEI governs Li morphology in anode-free Li metal batteries. Adv. Mater., e21411 (2026). https://doi.org/10.1002/adma.202521411

Y.-C. Hsieh, M. Leißing, S. Nowak, B.-J. Hwang, M. Winter et al., Quantification of dead lithium via in situ nuclear magnetic resonance spectroscopy. Cell Rep. Phys. Sci. 1(8), 100139 (2020). https://doi.org/10.1016/j.xcrp.2020.100139

A.B. Gunnarsdóttir, S. Vema, S. Menkin, L.E. Marbella, C.P. Grey, Investigating the effect of a fluoroethylene carbonate additive on lithium deposition and the solid electrolyte interphase in lithium metal batteries using in situ NMR spectroscopy. J. Mater. Chem. A 8(30), 14975–14992 (2020). https://doi.org/10.1039/D0TA05652A

X. Lin, Y. Shen, Y. Yu, Y. Huang, In situ NMR verification for stacking pressure-induced lithium deposition and dead lithium in anode-free lithium metal batteries. Adv. Energy Mater. 14(14), 2303918 (2024). https://doi.org/10.1002/aenm.202303918

C. Fang, J. Li, M. Zhang, Y. Zhang, F. Yang et al., Quantifying inactive lithium in lithium metal batteries. Nature 572(7770), 511–515 (2019). https://doi.org/10.1038/s41586-019-1481-z

Y. Liu, J. Sun, X. Hu, Y. Li, H. Du et al., Lithiophilic sites dependency of lithium deposition in Li metal host anodes. Nano Energy 94, 106883 (2022). https://doi.org/10.1016/j.nanoen.2021.106883

Y. Liu, Y. Li, Z. Du, C. He, J. Bi et al., Integrated gradient Cu current collector enables bottom-up Li growth for Li metal anodes: role of interfacial structure. Adv. Sci. 10(23), 2301288 (2023). https://doi.org/10.1002/advs.202301288

X. Huo, X. Gong, Y. Liu, Y. Yan, Z. Du et al., Conformal 3D Li/Li13Sn5 scaffolds anodes for high-areal energy density flexible lithium metal batteries. Adv. Sci. 11(14), 2309254 (2024). https://doi.org/10.1002/advs.202309254

Y. Liu, W. Guan, S. Li, J. Bi, X. Hu et al., Sustainable dual-layered interface for long-lasting stabilization of lithium metal anodes. Adv. Energy Mater. 13(48), 2302695 (2023). https://doi.org/10.1002/aenm.202302695

S. Latorrata, R. Balzarotti, Advances in graphene and graphene-related materials. Appl. Sci. 13(15), 8929 (2023). https://doi.org/10.3390/app13158929

Y. Qi, L. Sun, Z. Liu, Super graphene-skinned materials: an innovative strategy toward graphene applications. ACS Nano 18(6), 4617–4623 (2024). https://doi.org/10.1021/acsnano.3c11971

A.A. Assegie, C.-C. Chung, M.-C. Tsai, W.-N. Su, C.-W. Chen et al., Multilayer-graphene-stabilized lithium deposition for anode-free lithium-metal batteries. Nanoscale 11(6), 2710–2720 (2019). https://doi.org/10.1039/c8nr06980h

Y. Mu, Y. Chen, B. Wu, Q. Zhang, M. Lin et al., Dual vertically aligned electrode-inspired high-capacity lithium batteries. Adv. Sci. 9(30), 2203321 (2022). https://doi.org/10.1002/advs.202203321

R. Fang, K. Chen, L. Yin, Z. Sun, F. Li et al., The regulating role of carbon nanotubes and graphene in lithium-ion and lithium–sulfur batteries. Adv. Mater. 31(9), 1800863 (2019). https://doi.org/10.1002/adma.201800863

Y. Yang, E. Hu, Y. Zhu, W. Cao, J. Zhang et al., A flexible carbon nanotube film modified with gradient lithiophilic Cu2O/Cu heterojunction for dendrite-free lithium metal anodes. Chem. Eng. J. 477, 146879 (2023). https://doi.org/10.1016/j.cej.2023.146879

H. Ye, S. Xin, Y.-X. Yin, Y.-G. Guo, Advanced porous carbon materials for high-efficient lithium metal anodes. Adv. Energy Mater. 7(23), 1700530 (2017). https://doi.org/10.1002/aenm.201700530

R.U.R. Sagar, A. Nelson, M.W. Fazal, M.W. Khan, N. Mahmood et al., An ultralight porous carbon scaffold for anode-free lithium metal batteries. J. Mater. Chem. A 13(7), 5081–5090 (2025). https://doi.org/10.1039/d4ta07925f

Q. Zhang, X. Gu, B. Li, Q. Chen, Q. Zhai et al., Transfer-printed porous lithium host with sulfur mediated atomic tin clusters for high-energy-density and low-volume-change lithium metal pouch cells. Adv. Funct. Mater. 35(42), 2508957 (2025). https://doi.org/10.1002/adfm.202508957

H.Y. Seo, Y.B. Kim, T.G. Senthamaraikannan, D.-H. Lim, Y.C. Kang et al., Novel lithiophilic silver selenide nanocrystals within porous carbon microsphere: tailoring pore structures for enhanced lithium metal battery anodes. ACS Nano 19(6), 6152–6164 (2025). https://doi.org/10.1021/acsnano.4c14290

T. Lyu, F. Luo, Z. Wang, F. Jiang, S. Geng et al., Bifunctional lithiophilic carbon fibers with hierarchical structure for high-energy lithium metal batteries. Chem. Eng. J. 466, 143357 (2023). https://doi.org/10.1016/j.cej.2023.143357

Z. Yu, X. Yu, M. Fu, J. Chen, D. Wang et al., Lithiophilic silver nanowires-fenced three-dimensional carbon cloth current collector for dendrite-free lithium deposition. Carbon 213, 118224 (2023). https://doi.org/10.1016/j.carbon.2023.118224

M. Liu, J. Ma, X. Zhang, J. Wang, Y. Fan et al., Regulating of lithium-ion dynamic trajectory by ferromagnetic CoF2 to achieve ultra-stable deep lithium deposition over 10000 h. Adv. Funct. Mater. 35(10), 2416527 (2025). https://doi.org/10.1002/adfm.202416527

V.V. Avdeev, A.P. Savchenkova, L.A. Monyakina, I.V. Nikol’skaya, A.V. Khvostov, Intercalation reactions and carbide formation in graphite-lithium system. J. Phys. Chem. Solids 57(6–8), 947–949 (1996). https://doi.org/10.1016/0022-3697(95)00380-0

M. Golozar, P. Hovington, A. Paolella, S. Bessette, M. Lagacé et al., In situ scanning electron microscopy detection of carbide nature of dendrites in Li–polymer batteries. Nano Lett. 18(12), 7583–7589 (2018). https://doi.org/10.1021/acs.nanolett.8b03148

L. Li, X. Gong, C. Chen, Z. Huang, W. Chen et al., Lithium carbide prelithiation agent-coated separator facilitates compact expansion of silicon electrode. Adv. Funct. Mater. 35(25), 2424567 (2025). https://doi.org/10.1002/adfm.202424567

X. Tang, M. Bai, A. Shao, Z. Wang, H. Wang et al., Lithium carbide prelithiation agent enhanced the energy density and lifespan of anode-free battery. Small 21(21), 2501041 (2025). https://doi.org/10.1002/smll.202501041

H. Liang, L. Wang, L. Sheng, H. Xu, Y. Song et al., Focus on the electroplating chemistry of Li ions in nonaqueous liquid electrolytes: toward stable lithium metal batteries. Electrochem. Energy Rev. 5(2), 23 (2022). https://doi.org/10.1007/s41918-022-00158-2

S. Guo, T.-T. Wu, S.-Q. Lu, S.-T. Weng, M.-Y. Qi et al., Air-stable and lithium-compatible garnet pellet enabled by surface doping for high-performance solid-state batteries. Energy Environ. Sci. 17(21), 8392–8401 (2024). https://doi.org/10.1039/D4EE03199G

R. Zhang, X.-R. Chen, X. Chen, X.-B. Cheng, X.-Q. Zhang et al., Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes. Angew. Chem. Int. Ed. 56(27), 7764–7768 (2017). https://doi.org/10.1002/anie.201702099

G. Huang, J. Han, F. Zhang, Z. Wang, H. Kashani et al., Lithiophilic 3D nanoporous nitrogen-doped graphene for dendrite-free and ultrahigh-rate lithium-metal anodes. Adv. Mater. 31(2), 1805334 (2019). https://doi.org/10.1002/adma.201805334

Y. Liu, C. He, J. Bi, S. Li, H. Du et al., High-areal capacity, high-rate lithium metal anodes enabled by nitrogen-doped graphene mesh. Small 20(5), e2305964 (2024). https://doi.org/10.1002/smll.202305964

Z. Du, J. Bi, Z. Zhou, Y. Liu, L. Xing et al., Deformation-adaptive N, P-doped porous carbon nanofibers as a protective interlayer for stable Li metal anodes. Acta Mater. 283, 120584 (2025). https://doi.org/10.1016/j.actamat.2024.120584

Y. Tian, Z. Pei, D. Luan, X.W. Lou, Anchoring Sn nanops in necklace-like B, N, F-doped carbon fibers enables anode-less 5V-class Li-metal batteries. Angew. Chem. Int. Ed. 64(13), e202423454 (2025). https://doi.org/10.1002/anie.202423454

W.-J. Yu, J. Wang, F. Liu, Y. Cao, B. Deng et al., Self-supporting heteroatomic S/N Co-doped carbon scaffold for robust lithium metal anodes. Carbon 236, 120106 (2025). https://doi.org/10.1016/j.carbon.2025.120106

H. Xiao, X. Peng, X. Li, W. Chen, T. Xie et al., Laser-induced fluorine-doped graphene as a dual-functional anode for lithium metal batteries. Chem. Eng. J. 520, 165797 (2025). https://doi.org/10.1016/j.cej.2025.165797

Y. Ye, H. Xie, Y. Yang, Y. Xie, Y. Lu et al., Solid-solution or intermetallic compounds: phase dependence of the Li-alloying reactions for Li-metal batteries. J. Am. Chem. Soc. 145, 24775–24784 (2023). https://doi.org/10.1021/jacs.3c08711

E. Deng, X. Lu, Y. Sun, X. Lu, Sculpturing Cu current collector to enhance lithium metal electrochemistry. Energy Storage Mater. 82, 104602 (2025). https://doi.org/10.1016/j.ensm.2025.104602

C. Wei, Z. Yao, J. Ruan, Z. Song, A. Zhou et al., Double-layered skeleton of Li alloy anchored on 3D metal foam enabling ultralong lifespan of Li anode under high rate. Chin. Chem. Lett. 35(3), 109330 (2024). https://doi.org/10.1016/j.cclet.2023.109330

K. Yan, Z. Lu, H.-W. Lee, F. Xiong, P.-C. Hsu et al., Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth. Nat. Energy 1, 16010 (2016). https://doi.org/10.1038/nenergy.2016.10

A. Huang, H. Huang, S. Li, X. Pan, S. Sun et al., Carbon nanofibers surface-exposed with highly active Ag nanops for enhanced interfacial dynamics of lithium metal anodes. Adv. Funct. Mater. 35(47), 2506258 (2025). https://doi.org/10.1002/adfm.202506258

X. Zhou, S. Wang, Y. Li, Y. Yang, X. Xiao et al., Boosting Li-metal anode performance with lithiophilic Li–Zn seeds in a 2D reduced graphene oxide scaffold. Adv. Energy Mater. 15(3), 2403640 (2025). https://doi.org/10.1002/aenm.202403640

C. Chen, X. Yang, W. Zhou, L. Yu, Dendrite-free Li metal anode achieved by bi-functional host of NH2-modified UiO-66 on Zn-embedded porous carbon nanofibers. Adv. Funct. Mater. 35(26), 2501846 (2025). https://doi.org/10.1002/adfm.202501846

Y. Li, K. Yang, Z. Fan, C. Xu, Z. Li et al., Bilayer artificial interface engineering enables dendrite-free and low-temperature stable lithium metal batteries. Energy Storage Mater. 83, 104664 (2025). https://doi.org/10.1016/j.ensm.2025.104664

L.-T. Zhou, Q.-Q. Zhang, H.-D. Yuan, R.-Y. Fang, J.-M. Luo et al., Multifunctional C/ZnS nanocapsules modified carbon cloth as 3D conductive collector and lithium host for stable lithium metal anodes. Rare Met. 44(8), 5320–5332 (2025). https://doi.org/10.1007/s12598-025-03321-y

M. Bai, M. Zhong, W. Shen, J. Zhang, S. Guo, Free-standing graphene films decorated with lithiophilic ps as host electrodes for lithium plating/stripping in anode-less lithium metal batteries. J. Mater. Chem. A 13(12), 8865–8875 (2025). https://doi.org/10.1039/D4TA07788A

W. Jing, K. Zou, X. Dai, J. Sun, Q. Tan et al., Li-indium alloy anode for high-performance Li-metal batteries. J. Alloys Compd. 924, 166517 (2022). https://doi.org/10.1016/j.jallcom.2022.166517

H. Kim, C. Jo, Unraveling lithium metal plating behavior on cobalt-decorated 3D carbon textile for high-energy-density lithium metal batteries. J. Energy Chem. 114, 264–276 (2026). https://doi.org/10.1016/j.jechem.2025.10.020

D. Park, J. Park, W. Choi, Versatile multi-lithiophilic metal oxide nano seeds embedded in hollow carbon nanospheres via electrostatically functional template for dendrite-free lithium metal anodes. Chem. Eng. J. 491, 152146 (2024). https://doi.org/10.1016/j.cej.2024.152146

M. Song, Y. Li, L. Gao, R. Zhao, Y. Xu et al., A 3D lithiophilic host for dendrite-free lithium metal anode via one-step carbonization of an energetic metal-organic framework. Small 20(9), 2306187 (2024). https://doi.org/10.1002/smll.202306187

J. Cao, Y. Shi, D. Muhtar, A. Gao, G. Qian et al., Topological Li-SbF3@Cu alloying anode for high-energy-density Li metal batteries. Adv. Mater. 37(34), 2501811 (2025). https://doi.org/10.1002/adma.202501811

G. Lai, J. Jiao, C. Fang, Y. Jiang, L. Sheng et al., The mechanism of Li deposition on the Cu substrates in the anode-free Li metal batteries. Small 19(3), 2205416 (2023). https://doi.org/10.1002/smll.202205416

J. Cao, W. Chen, A. Gao, D. Muhtar, G. Du et al., Li2ZnCu3 modified Cu current collector to regulate Li deposition. Angew. Chem. Int. Ed. 64(1), e202413065 (2025). https://doi.org/10.1002/anie.202413065

M. Zhu, X. Teng, X. Li, C. Cai, C. Shi et al., Ameliorating lithium deposition regulation via alloying lithiophilic zinc metal for stable lithium metal batteries. Chem. Eng. J. 506, 160150 (2025). https://doi.org/10.1016/j.cej.2025.160150

F. Cheng, X. Yang, O. Ka, L. Wen, X. Wang et al., A 3D multifunctional host anode from commercial carbon cloth for lithium metal batteries. J. Mater. Chem. A 11(8), 4205–4219 (2023). https://doi.org/10.1039/d2ta09182h

H. Lim, M. Choi, H. Kang, W. Choi, Accelerating lithium deposition kinetics via lithiophilic Ag-decorated graphitic carbon nitride spheres for stable lithium metal anode. Energy Environ. Mater. 8(2), e12830 (2025). https://doi.org/10.1002/eem2.12830

Z. Yu, Q. Yang, W. Xue, J. Shen, J. Zhang et al., Uniformizing the lithium deposition by gradient lithiophilicity and conductivity for stable lithium-metal batteries. Nanoscale 15(9), 4529–4535 (2023). https://doi.org/10.1039/D2NR06210K

Y.-N. Wang, Y.-X. Zhan, X.-Q. Zhang, J.-Q. Huang, Advances in carbon-based composite anodes with gradients of lithiophilicity and conductivity used for stable lithium metal batteries. New Carbon Mater. 38(4), 623–637 (2023). https://doi.org/10.1016/S1872-5805(23)60744-9

J. Chen, G. Liu, X. Han, H. Wu, T. Hu et al., Engineering high-performance Li metal batteries through dual-gradient porous Cu-CuZn host. ACS Nano 18(21), 13662–13674 (2024). https://doi.org/10.1021/acsnano.4c00720

W. Guan, X. Hu, Y. Liu, J. Sun, C. He et al., Advances in the emerging gradient designs of Li metal hosts. Research 2022, 2022/9846537 (2022). https://doi.org/10.34133/2022/9846537

S.-H. Hong, D.-H. Jung, J.-H. Kim, Y.-H. Lee, S.-J. Cho et al., Electrical conductivity gradient based on heterofibrous scaffolds for stable lithium-metal batteries. Adv. Funct. Mater. 30(14), 1908868 (2020). https://doi.org/10.1002/adfm.201908868

Y. Zhang, M. Yao, T. Wang, H. Wu, Y. Zhang, A 3D hierarchical host with gradient-distributed dielectric properties toward dendrite-free lithium metal anode. Angew. Chem. Int. Ed. 63(22), e202403399 (2024). https://doi.org/10.1002/anie.202403399

C. Huang, G. Chang, D. Zhao, Z. Li, H. Zhao, A triple-longitudinal lithiophilic gradient induced uniform lithium deposition. Appl. Surf. Sci. 646, 158854 (2024). https://doi.org/10.1016/j.apsusc.2023.158854

S. Niu, S.-W. Zhang, D. Li, X. Wang, X. Chen et al., Sandwiched Li plating between lithiophilic-lithiophobic gradient Silver@Fullerene interphase layer for ultrastable lithium metal anodes. Chem. Eng. J. 429, 132156 (2022). https://doi.org/10.1016/j.cej.2021.132156

X. Wang, B. Zhao, X. Li, X. Qi, Y. Dai et al., Inducing spherical lithium deposition via simultaneously optimized electric field and ionic flux for fast-charging lithium metal batteries. Energy Storage Mater. 77, 104200 (2025). https://doi.org/10.1016/j.ensm.2025.104200

Z. Song, Z. Wang, C. Wei, J. Xing, Q. Zhao et al., Enabling bottom-up Li deposition: a smart pore-size/lithiophilicity dual-gradient three-dimensional host. ACS Nano 19(44), 38724–38734 (2025). https://doi.org/10.1021/acsnano.5c14302

C. Zhang, K. Chen, X. Li, Z. Wang, S. Yang et al., Carbon nanofiber host with directed gradient pore size for dendrite-free lithium metal anodes. ACS Appl. Energy Mater. 8(9), 6203–6212 (2025). https://doi.org/10.1021/acsaem.5c00632

H. Liu, J. Di, P. Wang, R. Gao, H. Tian et al., A novel design of 3D carbon host for stable lithium metal anode. Carbon Energy 4(4), 654–664 (2022). https://doi.org/10.1002/cey2.193

W. Huang, Y. Yu, Z. Hou, Z. Liang, Y. Zheng et al., Dendrite-free lithium electrode enabled by graphene aerogels with gradient porosity. Energy Storage Mater. 33, 329–335 (2020). https://doi.org/10.1016/j.ensm.2020.08.032

H.-J. Noh, M.-H. Lee, B.G. Kim, J.-H. Park, S.-M. Lee et al., 3D carbon-based porous anode with a pore-size gradient for high-performance lithium metal batteries. ACS Appl. Mater. Interfaces 13(46), 55227–55234 (2021). https://doi.org/10.1021/acsami.1c17616

J. Shin, W. Choi, J. Jang, Unlocking the potential of anode-free lithium metal batteries: innovative strategies for extended cycle life. J. Energy Chem. 117, 488–507 (2026). https://doi.org/10.1016/j.jechem.2026.01.061

C. Jin, O. Sheng, J. Luo, H. Yuan, C. Fang et al., 3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries. Nano Energy 37, 177–186 (2017). https://doi.org/10.1016/j.nanoen.2017.05.015

M. Bai, M. Zhong, X. Tang, W. Shen, J. Zhang et al., Heteroatoms doped holey graphene enhanced carbon frameworks with chemical pre-lithiation affording reversible lithium plating/stripping in anode-free lithium metal batteries. Energy Storage Mater. 82, 104648 (2025). https://doi.org/10.1016/j.ensm.2025.104648

P. Xue, S. Liu, X. Shi, C. Sun, C. Lai et al., A hierarchical silver-nanowire–graphene host enabling ultrahigh rates and superior long-term cycling of lithium-metal composite anodes. Adv. Mater. 30(44), 1804165 (2018). https://doi.org/10.1002/adma.201804165

W. Zhu, H. Demers, G. Girard, D. Clement, Z. Feng et al., Monitoring lithium metal plating/stripping in anode free//NMC811 battery by in-situ X-rays diffraction. J. Power. Sources 546, 231941 (2022). https://doi.org/10.1016/j.jpowsour.2022.231941

P.P. Paul, C. Cao, V. Thampy, H.-G. Steinrück, T.R. Tanim et al., Using in situ high-energy X-ray diffraction to quantify electrode behavior of Li-ion batteries from extreme fast charging. ACS Appl. Energy Mater. 4(10), 11590–11598 (2021). https://doi.org/10.1021/acsaem.1c02348

A.-Y. Hou, C.-Y. Huang, C.-L. Tsai, C.-W. Huang, R. Schierholz et al., All-solid-state garnet-based lithium batteries at work–in operando TEM investigations of delithiation/lithiation process and capacity degradation mechanism. Adv. Sci. 10(5), 2205012 (2023). https://doi.org/10.1002/advs.202205012

M. Golozar, A. Paolella, H. Demers, S. Savoie, G. Girard et al., Direct observation of lithium metal dendrites with ceramic solid electrolyte. Sci. Rep. 10, 18410 (2020). https://doi.org/10.1038/s41598-020-75456-0

M. Golozar, A. Paolella, H. Demers, S. Bessette, M. Lagacé et al., In situ observation of solid electrolyte interphase evolution in a lithium metal battery. Commun. Chem. 2, 131 (2019). https://doi.org/10.1038/s42004-019-0234-0

M. Romio, J. Kahr, E. Miele, M. Krammer, Y. Surace et al., Operando optical microscopy of dead lithium growth in anode-less configuration. Adv. Mater. Technol. 9(13), 2301902 (2024). https://doi.org/10.1002/admt.202301902

L. Zhang, H. Fan, Y. Dang, Q. Zhuang, H. Arandiyan et al., Recent advances in in situ and operando characterization techniques for Li7La3Zr2O12-based solid-state lithium batteries. Mater. Horiz. 10(5), 1479–1538 (2023). https://doi.org/10.1039/D3MH00135K

S. Rajendran, N.K. Thangavel, K. Mahankali, L.M.R. Arava, Toward moisture-stable and dendrite-free garnet-type solid-state electrolytes. ACS Appl. Energy Mater. 3(7), 6775–6784 (2020). https://doi.org/10.1021/acsaem.0c00905

W. Guan, T. Wang, Y. Liu, H. Du, S. Li et al., Impact of morphological dimensions in carbon-based interlayers on lithium metal anode stabilization. Adv. Energy Mater. 13(45), 2302565 (2023). https://doi.org/10.1002/aenm.202302565

D. Aurbach, Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries. J. Power. Sources 89(2), 206–218 (2000). https://doi.org/10.1016/S0378-7753(00)00431-6

W. Li, X. Liu, H. Celio, P. Smith, A. Dolocan et al., Mn versus Al in layered oxide cathodes in lithium-ion batteries: a comprehensive evaluation on long-term cyclability. Adv. Energy Mater. 8(15), 1703154 (2018). https://doi.org/10.1002/aenm.201703154

W. Weng, V.G. Pol, K. Amine, Ultrasound assisted design of sulfur/carbon cathodes with partially fluorinated ether electrolytes for highly efficient Li/S batteries. Adv. Mater. 25(11), 1608–1615 (2013). https://doi.org/10.1002/adma.201204051

J. Zheng, S. Chen, W. Zhao, J. Song, M.H. Engelhard et al., Extremely stable sodium metal batteries enabled by localized high-concentration electrolytes. ACS Energy Lett. 3(2), 315–321 (2018). https://doi.org/10.1021/acsenergylett.7b01213

C. Zhang, S. Gu, D. Zhang, J. Ma, H. Zheng et al., Nonflammable, localized high-concentration electrolyte towards a high-safety lithium metal battery. Energy Storage Mater. 52, 355–364 (2022). https://doi.org/10.1016/j.ensm.2022.08.018

Z. Yuan, A. Chen, J. Liao, L. Song, X. Zhou, Recent advances in multifunctional generalized local high-concentration electrolytes for high-efficiency alkali metal batteries. Nano Energy 119, 109088 (2024). https://doi.org/10.1016/j.nanoen.2023.109088

Y.-X. Yao, X. Chen, C. Yan, X.-Q. Zhang, W.-L. Cai et al., Regulating interfacial chemistry in lithium-ion batteries by a weakly solvating electrolyte. Angew. Chem. 133(8), 4136–4143 (2021). https://doi.org/10.1002/ange.202011482

Q. Liu, Z. Zeng, M. Qin, T. Yang, H. Ma et al., Pairing non-solvating cosolvent with weakly solvating solvents for facile desolvation to enable EC-free and high-rate electrolyte for lithium ion batteries. Batter. Supercaps 7(5), e202400034 (2024). https://doi.org/10.1002/batt.202400034

J. Yang, J. Shang, Q. Liu, X. Yang, Y. Tan et al., Variant-localized high-concentration electrolyte without phase separation for low-temperature batteries. Angew. Chem. Int. Ed. 63(33), e202406182 (2024). https://doi.org/10.1002/anie.202406182

M. Karbak, K. Yim, Y.S. Meng, Y. Shao, W. Xu, Weakly solvating electrolytes: a solvation-centric paradigm for rechargeable metal batteries. Chem. Sci. 16(44), 20694–20717 (2025). https://doi.org/10.1039/d5sc06221g

S. Sun, K. Wang, Z. Hong, M. Zhi, K. Zhang et al., Electrolyte design for low-temperature Li-metal batteries: challenges and prospects. Nano-Micro Lett. 16(1), 35 (2023). https://doi.org/10.1007/s40820-023-01245-9

G.G. Eshetu, H. Zhang, X. Judez, H. Adenusi, M. Armand et al., Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes. Nat. Commun. 12, 5459 (2021). https://doi.org/10.1038/s41467-021-25334-8

N. Zachmann, M. Petranikova, B. Ebin, Electrolyte recovery from spent Lithium-Ion batteries using a low temperature thermal treatment process. J. Ind. Eng. Chem. 118, 351–361 (2023). https://doi.org/10.1016/j.jiec.2022.11.020

X. Su, Y. Xu, Y. Wu, H. Li, J. Yang et al., Liquid electrolytes for low-temperature lithium batteries: main limitations, current advances, and future perspectives. Energy Storage Mater. 56, 642–663 (2023). https://doi.org/10.1016/j.ensm.2023.01.044

S. Afroze, M.S. Reza, K. Kuterbekov, A. Kabyshev, M.M. Kubenova et al., Emerging and recycling of Li-ion batteries to aid in energy storage, a review. Recycling 8(3), 48 (2023). https://doi.org/10.3390/recycling8030048

Z. Zhang, W.-Q. Han, From liquid to solid-state lithium metal batteries: fundamental issues and recent developments. Nano-Micro Lett. 16(1), 24 (2023). https://doi.org/10.1007/s40820-023-01234-y

J.F. Peters, M. Baumann, B. Zimmermann, J. Braun, M. Weil, The environmental impact of Li-Ion batteries and the role of key parameters–a review. Renew. Sustain. Energy Rev. 67, 491–506 (2017). https://doi.org/10.1016/j.rser.2016.08.039

A. Machín, C. Morant, F. Márquez, Advancements and challenges in solid-state battery technology: an in-depth review of solid electrolytes and anode innovations. Batteries 10(1), 29 (2024). https://doi.org/10.3390/batteries10010029

V. Thangadurai, S. Narayanan, D. Pinzaru, Garnet-type solid-state fast Li ion conductors for Li batteries: critical review. Chem. Soc. Rev. 43(13), 4714–4727 (2014). https://doi.org/10.1039/c4cs00020j

R. Chen, W. Qu, X. Guo, L. Li, F. Wu, The pursuit of solid-state electrolytes for lithium batteries: from comprehensive insight to emerging horizons. Mater. Horiz. 3(6), 487–516 (2016). https://doi.org/10.1039/c6mh00218h

Y. Zhu, X. He, Y. Mo, Origin of outstanding stability in the lithium solid electrolyte materials: insights from thermodynamic analyses based on first-principles calculations. ACS Appl. Mater. Interfaces 7(42), 23685–23693 (2015). https://doi.org/10.1021/acsami.5b07517

S. Chen, D. Xie, G. Liu, J.P. Mwizerwa, Q. Zhang et al., Sulfide solid electrolytes for all-solid-state lithium batteries: structure, conductivity, stability and application. Energy Storage Mater. 14, 58–74 (2018). https://doi.org/10.1016/j.ensm.2018.02.020

O. Sheng, C. Jin, X. Ding, T. Liu, Y. Wan et al., A decade of progress on solid-state electrolytes for secondary batteries: advances and contributions. Adv. Funct. Mater. 31(27), 2100891 (2021). https://doi.org/10.1002/adfm.202100891

D. Campanella, D. Belanger, A. Paolella, Beyond garnets, phosphates and phosphosulfides solid electrolytes: new ceramic perspectives for all solid lithium metal batteries. J. Power. Sources 482, 228949 (2021). https://doi.org/10.1016/j.jpowsour.2020.228949

W. Li, M. Li, H. Ren, J.T. Kim, R. Li et al., Nitride solid-state electrolytes for all-solid-state lithium metal batteries. Energy Environ. Sci. 18(10), 4521–4554 (2025). https://doi.org/10.1039/d4ee04927f

V. Raj, V. Venturi, V.R. Kankanallu, B. Kuiri, V. Viswanathan et al., Direct correlation between void formation and lithium dendrite growth in solid-state electrolytes with interlayers. Nat. Mater. 21(9), 1050–1056 (2022). https://doi.org/10.1038/s41563-022-01264-8

R.D. Widyantara, S. Zulaikah, F.B. Juangsa, B.A. Budiman, M.