Issue

Vol. 16 (2024)

Multiphase Interfacial Regulation Based on Hierarchical Porous Molybdenum Selenide to Build Anticorrosive and Multiband Tailorable Absorbers

https://doi.org/10.1007/s40820-023-01212-4
Tianbao Zhao
College of Science, Sichuan Agricultural University, Ya’an 625014, People’s Republic of China
Zirui Jia
College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071, People’s Republic of China
Jinkun Liu
Institute of Materials for Energy and Environment, State Key Laboratory of Bio‑Fibers and Eco‑Textiles, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, People’s Republic of China
Yan Zhang
Institute of Materials for Energy and Environment, State Key Laboratory of Bio‑Fibers and Eco‑Textiles, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, People’s Republic of China
Guanglei Wu
Institute of Materials for Energy and Environment, State Key Laboratory of Bio‑Fibers and Eco‑Textiles, College of Materials Science and Engineering, Qingdao University, Qingdao 266071, People’s Republic of China
Pengfei Yin
College of Science, Sichuan Agricultural University, Ya’an 625014, People’s Republic of China

Corresponding Author: Pengfei Yin

yinpengfei@sicau.edu.cn

Nano-Micro Letters, Vol. 16 (2024), Article Number: 6

Abstract

Electromagnetic wave (EMW) absorbing materials have an irreplaceable position in the field of military stealth as well as in the field of electromagnetic pollution control. And in order to cope with the complex electromagnetic environment, the design of multifunctional and multiband high efficiency EMW absorbers remains a tremendous challenge. In this work, we designed a three-dimensional porous structure via the salt melt synthesis strategy to optimize the impedance matching of the absorber. Also, through interfacial engineering, a molybdenum carbide transition layer was introduced between the molybdenum selenide nanoparticles and the three-dimensional porous carbon matrix to improve the absorption behavior of the absorber. The analysis indicates that the number and components of the heterogeneous interfaces have a significant impact on the EMW absorption performance of the absorber due to mechanisms such as interfacial polarization and conduction loss introduced by interfacial engineering. Wherein, the prepared MoSe2/MoC/PNC composites showed excellent EMW absorption performance in C, X, and Ku bands, especially exhibiting a reflection loss of − 59.09 dB and an effective absorption bandwidth of 6.96 GHz at 1.9 mm. The coordination between structure and components endows the absorber with strong absorption, broad bandwidth, thin thickness, and multi-frequency absorption characteristics. Remarkably, it can effectively reinforce the marine anticorrosion property of the epoxy resin coating on Q235 steel substrate. This study contributes to a deeper understanding of the relationship between interfacial engineering and the performance of EMW absorbers, and provides a reference for the design of multifunctional, multiband EMW absorption materials.


Highlights:
1 The hierarchical porous structure is regulated by various species of PVP to achieve impedance matching.
2 Interfacial engineering boosts conductivity and constructs a multiband (C, X, Ku) tunable electromagnetic wave absorber.
3 Hierarchical porous molybdenum selenide/epoxy coating exhibits marine anticorrosion capability.

Keywords

Interfacial engineering Anticorrosion Multiband Electromagnetic wave absorber
Zhao, Tianbao, Zirui Jia, Jinkun Liu, Yan Zhang, Guanglei Wu, and Pengfei Yin. 2023. “Multiphase Interfacial Regulation Based on Hierarchical Porous Molybdenum Selenide to Build Anticorrosive and Multiband Tailorable Absorbers”. Nano-Micro Letters 16 (November):6. https://doi.org/10.1007/s40820-023-01212-4.
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX
References
  1. H.L. Lv, Y.X. Yao, S.C. Li, G.L. Wu, B. Zhao et al., Staggered circular nanoporous graphene converts electromagnetic waves into electricity. Nat. Commun. 14, 1982 (2023). https://doi.org/10.1038/s41467-023-37436-6
  2. Y.L. Wu, D. Lan, J.W. Ren, S.J. Zhang, A mini review of MOFs derived multifunctional absorbents: From perspective of components regulation. Mater. Today Phys. 36, 101178 (2023). https://doi.org/10.1016/j.mtphys.2023.101178
  3. Y.Q. Guo, K.P. Ruan, G.S. Wang, J.W. Gu, Advances and mechanisms in polymer composites toward thermal conduction and electromagnetic wave absorption. Sci. Bull. 68(11), 1195–1212 (2023). https://doi.org/10.1016/j.scib.2023.04.036
  4. C. Pan, K.C. Kou, Y. Zhang, Z.Y. Li, G.L. Wu, Enhanced through-plane thermal conductivity of PTFE composites with hybrid fillers of hexagonal boron nitride platelets and aluminum nitride ps. Compos. Part B Eng. 153, 1–8 (2018). https://doi.org/10.1016/j.compositesb.2018.07.019
  5. Y.L. Zhang, J. Kong, J.W. Gu, New generation electromagnetic materials: harvesting instead of dissipation solo. Sci. Bull. 67(14), 1413–1415 (2022). https://doi.org/10.1016/j.scib.2022.06.017
  6. C. Pan, K.C. Kou, Q. Jia, Y. Zhang, G.L. Wu et al., Improved thermal conductivity and dielectric properties of hBN/PTFE composites via surface treatment by silane coupling agent. Compos. Part B Eng. 111, 83–90 (2017). https://doi.org/10.1016/j.compositesb.2016.11.050
  7. H.X. Zhang, B.B. Wang, A.L. Feng, N. Zhang, Z.R. Jia et al., Mesoporous carbon hollow microspheres with tunable pore size and shell thickness as efficient electromagnetic wave absorbers. Compos. Part B Eng. 167, 690–699 (2019). https://doi.org/10.1016/j.compositesb.2019.03.055
  8. L.Y. Yu, Q.Q. Zhu, Z.Q. Guo, Y.H. Cheng, Z.R. Jia et al., Unique electromagnetic wave absorber for three-dimensional framework engineering with copious heterostructures. J. Mater. Sci. Technol. 170, 129–139 (2024). https://doi.org/10.1016/j.jmst.2023.06.024
  9. D. Lan, Y. Wang, Y.Y. Wang, X.F. Zhu, H.F. Li et al., Impact mechanisms of aggregation state regulation strategies on the microwave absorption properties of flexible polyaniline. J. Colloid Interface Sci. 651, 494–503 (2024). https://doi.org/10.1016/j.jcis.2023.08.019
  10. Z.G. Gao, B.H. Xu, M.L. Ma, A.L. Feng, Y. Zhang et al., Electrostatic self-assembly synthesis of ZnFe2O4 quantum dots (ZnFe2O4@C) and electromagnetic microwave absorption. Compos. Part B Eng. 179, 107417 (2019). https://doi.org/10.1016/j.compositesb.2019.107417
  11. H.X. Zhang, Z.R. Jia, A.L. Feng, Z.H. Zhou, L. Chen et al., In situ deposition of pitaya-like Fe3O4@C magnetic microspheres on reduced graphene oxide nanosheets for electromagnetic wave absorber. Compos. Part B Eng. 199, 108261 (2020). https://doi.org/10.1016/j.compositesb.2020.108261
  12. Y. Wang, X. Gao, C.H. Lin, L.Y. Shi, X.H. Li et al., Metal organic frameworks-derived Fe-Co nanoporous carbon/graphene composite as a high-performance electromagnetic wave absorber. J. Alloys Compd. 785, 765–773 (2019). https://doi.org/10.1016/j.jallcom.2019.01.271
  13. J.L. Liu, H.S. Liang, Y. Zhang, G.L. Wu, H.J. Wu, Facile synthesis of ellipsoid-like MgCo2O4/Co3O4 composites for strong wideband microwave absorption application. Compos. Part B Eng. 176, 107240 (2019). https://doi.org/10.1016/j.compositesb.2019.107240
  14. M. Wu, A.K. Darboe, X.S. Qi, R. Xie, S.J. Qin et al., Optimization, selective and efficient production of CNTs/CoxFe3-xO4 core/shell nanocomposites as outstanding microwave absorbers. J. Mater. Chem. C 8, 11936–11949 (2020). https://doi.org/10.1039/D0TC01970D
  15. H.X. Zhang, Z.R. Jia, A.L. Feng, Z.H. Zhou, C.H. Zhang et al., Enhanced microwave absorption performance of sulfur-doped hollow carbon microspheres with mesoporous shell as a broadband absorber. Compos. Commun. 19, 42–45 (2020). https://doi.org/10.1016/j.coco.2020.02.010
  16. Y. Li, Y. Qing, W. Li, M. Zong, F. Luo, Novel Magnéli Ti4O7/Ni/poly(vinylidene fluoride) hybrids for high-performance electromagnetic wave absorption. Adv. Compos. Hybrid Mater. 4, 1027–1038 (2021). https://doi.org/10.1007/s42114-021-00297-y
  17. Q.Q. Liang, L. Wang, X.S. Qi, Q. Peng, X. Gong et al., Hierarchical engineering of CoNi@Air@C/SiO2@polypyrrole multicomponent nanocubes to improve the dielectric loss capability and magnetic-dielectric synergy. J. Mater. Sci. Technol. 147, 37–46 (2023). https://doi.org/10.1016/j.jmst.2022.10.069
  18. T. Gao, H. Rong, K.H. Mahmoud, J. Ruan, S.M. El-Bahy et al., Iron/silicon carbide composites with tunable high-frequency magnetic and dielectric properties for potential electromagnetic wave absorption. Adv. Compos. Hybrid Mater. 5, 1158–1167 (2022). https://doi.org/10.1007/s42114-022-00507-1
  19. L.L. Xiang, X.S. Qi, Y.C. Rao, L. Wang, X. Gong et al., A simple strategy to develop heterostructured carbon paper/Co nanops composites with lightweight, tunable and broadband microwave absorption. Mater. Today Phys. 34, 101030 (2023). https://doi.org/10.1016/j.mtphys.2023.101030
  20. J. Guo, Z.R. Chen, X. Li, S.H. Xi, W. Abdul et al., Enhanced electromagnetic wave absorption of engineered epoxy nanocomposites with the assistance of polyaniline fillers. Adv. Compos. Hybrid Mater. 5, 1769–1777 (2022). https://doi.org/10.1007/s42114-022-00417-2
  21. Y.L. Zhang, K.P. Ruan, K. Zhou, J.W. Gu, Controlled distributed Ti3C2Tx hollow microspheres on thermally conductive polyimide composite films for excellent electromagnetic interference shielding. Adv. Mater. 35(16), 2211642 (2023). https://doi.org/10.1002/adma.202211642
  22. Z.H. Zhou, Q.Q. Zhu, Y. Liu, Y. Zhang, Z.R. Jia et al., Construction of self-assembly based tunable absorber: lightweight, hydrophobic and self-cleaning properties. Nano-Micro Lett. 15, 137 (2023). https://doi.org/10.1007/s40820-023-01108-3
  23. T.M. Jia, X.S. Qi, L. Wang, J.L. Yang, X. Gong et al., Constructing mixed-dimensional lightweight flexible carbon foam/carbon nanotubes-based heterostructures: an effective strategy to achieve tunable and boosted microwave absorption. Carbon 206, 364–374 (2023). https://doi.org/10.1016/j.carbon.2023.02.046
  24. W. Wang, D. Liu, H. Cheng, T. Cao, Y. Li et al., Structural design and broadband radar absorbing performance of multi-layer patch using carbon black. Adv. Compos. Hybrid Mater. 5, 3137–3145 (2022). https://doi.org/10.1007/s42114-021-00399-7
  25. N. Wu, B. Zhao, J. Liu, Y. Li, Y. Chen et al., MOF-derived porous hollow Ni/C composites with optimized impedance matching as lightweight microwave absorption materials. Adv. Compos. Hybrid Mater. 4, 707–715 (2021). https://doi.org/10.1007/s42114-021-00307-z
  26. X.L. Cao, X.H. Liu, J.H. Zhu, Z.R. Jia, J.K. Liu et al., Optimal p distribution induced interfacial polarization in hollow double-shell composites for electromagnetic waves absorption performance. J. Colloid Interface Sci. 634, 268–278 (2023). https://doi.org/10.1016/j.jcis.2022.12.048
  27. J.X. Xiao, X.S. Qi, X. Gong, Q. Peng, Y.L. Chen et al., Defect and interface engineering in core@shell structure hollow carbon@MoS2 nanocomposites for boosted microwave absorption performance. Nano Res. 15, 7778–7787 (2022). https://doi.org/10.1007/s12274-022-4625-7
  28. C. Li, X.S. Qi, X. Gong, Q. Peng, Y.L. Chen et al., Magnetic-dielectric synergy and interfacial engineering to design yolk–shell structured CoNi@void@C and CoNi@void@C@MoS2 nanocomposites with tunable and strong wideband microwave absorption. Nano Res. 15, 6761–6771 (2022). https://doi.org/10.1007/s12274-022-4468-2
  29. L.F. Sun, Q.Q. Zhu, Z.R. Jia, Z.Q. Guo, W.R. Zhao et al., CrN attached multicomponent carbon nanotube composites with superior electromagnetic wave absorption performance. Carbon 208, 1–9 (2023). https://doi.org/10.1016/j.carbon.2023.03.021
  30. F. Luo, D.Q. Liu, T.S. Cao, H.F. Cheng, J.C. Kuang et al., Study on broadband microwave absorbing performance of gradient porous structure. Adv. Compos. Hybrid Mater. 4, 591–601 (2021). https://doi.org/10.1007/s42114-021-00275-4
  31. W. Wang, X. Deng, D. Liu, F. Luo, H. Cheng et al., Broadband radar-absorbing performance of square-hole structure. Adv. Compos. Hybrid Mater. 5, 525–535 (2022). https://doi.org/10.1007/s42114-021-00376-0
  32. T.Q. Hou, J.W. Wang, T.T. Zheng, Y. Liu, G.L. Wu et al., Anion exchange of metal ps on carbon-based skeletons for promoting dielectric equilibrium and high-efficiency electromagnetic wave absorption. Small 2303463 (2023). https://doi.org/10.1002/smll.202303463
  33. S.J. Zhang, B. Cheng, Z.R. Jia, Z.W. Zhao, X.T. Jin et al., The art of framework construction: hollow-structured materials toward high-efficiency electromagnetic wave absorption. Adv. Compos. Hybrid Mater. 5(3), 1658–1698 (2022). https://doi.org/10.1007/s42114-022-00514-2
  34. W.J. Tian, H.Y. Zhang, X.G. Duan, H.Q. Sun, G.S. Shao et al., Porous carbons: structure-oriented design and versatile applications. Adv. Funct. Mater. 30(17), 1909265 (2020). https://doi.org/10.1002/adfm.201909265
  35. Y.C. Wan, M.Y. Zheng, R.T. Lv, Rational design of MO2C nanosheets anchored on hierarchically porous carbon for boosting electrocatalytic N2 reduction to NH3. Mater. Today Energy 32, 101240 (2023). https://doi.org/10.1016/j.mtener.2022.101240
  36. X.F. Liu, N. Fechler, M. Antonietti, Salt melt synthesis of ceramics, semiconductors and carbon nanostructures. Chem. Soc. Rev. 42(21), 8237–8265 (2013). https://doi.org/10.1039/C3CS60159E
  37. J.X. Xiao, X.S. Qi, X. Gong, Q. Peng, Y.L. Chen et al., Tunable and improved microwave absorption of flower-like core@shell MFe2O4@MoS2 (M = Mn, Ni and Zn) nanocomposites by defect and interface engineering. J. Mater. Sci. Technol. 139, 137–146 (2022). https://doi.org/10.1016/j.jmst.2022.08.022
  38. J.J. Zhang, Z.H. Li, X.S. Qi, X. Gong, R. Xie et al., Constructing flower-like core@shell MoSe2-based nanocomposites as a novel and high-efficient microwave absorber. Compos. Part B Eng. 222, 109067 (2021). https://doi.org/10.1016/j.compositesb.2021.109067
  39. Y. Cheng, Y. Zhao, H.Q. Zhao, H.L. Lv, X.D. Qi et al., Engineering morphology configurations of hierarchical flower-like MoSe2 spheres enable excellent low-frequency and selective microwave response properties. Chem. Eng. J. 372, 390–398 (2019). https://doi.org/10.1016/j.cej.2019.04.174
  40. R.G. Mariano, K. Mckelvey, H.S. White, M.W. Kanan, Selective increase in CO2 electroreduction activity at grain-boundary surface terminations. Science 358(6367), 1187–1192 (2017). https://doi.org/10.1126/science.aao3691
  41. J.K. Liu, Z.R. Jia, Y.H. Dong, J.J. Li, X.L. Cao et al., Structural engineering and compositional manipulation for high-efficiency electromagnetic microwave absorption. Mater. Today Phys. 27, 100801 (2022). https://doi.org/10.1016/j.mtphys.2022.100801
  42. X. Zhao, W. Cai, Y. Yang, X.D. Song, Z. Neale et al., MoSe2 nanosheets perpendicularly grown on graphene with Mo-C bonding for sodium-ion capacitors. Nano Energy 47, 224–234 (2018). https://doi.org/10.1016/j.nanoen.2018.03.002
  43. P. Ge, H.S. Hou, C.E. Banks, C.W. Foster, S.J. Li et al., Binding MoSe2 with carbon constrained in carbonous nanosphere towards high-capacity and ultrafast Li/Na-ion storage. Energy Storage Mater. 12, 310–323 (2018). https://doi.org/10.1016/j.ensm.2018.02.012
  44. Y. Wu, L. Chen, Y.X. Han, P.B. Liu, H.H. Xu et al., Hierarchical construction of CNT networks in aramid papers for high-efficiency microwave absorption. Nano Res. 16, 7801–7809 (2023). https://doi.org/10.1007/s12274-023-5522-4
  45. Y.X. Han, M.K. He, J.W. Hu, P.B. Liu, Z.W. Liu et al., Hierarchical design of FeCo-based microchains for enhanced microwave absorption in C band. Nano Res. 16, 1773–1778 (2023). https://doi.org/10.1021/acs.iecr.8b00997
  46. Y.C. Zhang, S.T. Gao, B.L. Xia, J. He, F. Wei et al., Coal gasification fine slag doped with Fe3O4: High-performance electromagnetic-wave absorbers. J. Magn. Magn. Mater. 580, 170916 (2023). https://doi.org/10.1016/j.jmmm.2023.170916
  47. X.K. Lu, X. Li, W.J. Zhu, H.L. Xu, Construction of embedded heterostructures in biomass-derived carbon frameworks for enhancing electromagnetic wave absorption. Carbon 191, 600–609 (2022). https://doi.org/10.1016/j.carbon.2022.01.050
  48. M. Zhu, Y.T. Lei, H. Wu, L. Kong, H.L. Xu et al., Porous hybrid scaffold strategy for the realization of lightweight, highly efficient microwave absorbing materials. J. Mater. Sci. Technol. 129, 215–222 (2022). https://doi.org/10.1016/j.jmst.2022.04.042
  49. F. Doustdar, M. Ghorbani, Zif-8 enriched electrospun ethyl cellulose/polyvinylpyrrolidone scaffolds: The key role of polyvinylpyrrolidone molecular weight. Carbohydr. Polym. 291, 119620 (2022). https://doi.org/10.1016/j.carbpol.2022.119620
  50. P.B. Liu, S. Gao, G.Z. Zhang, Y. Huang, W.B. You et al., Hollow engineering to Co@N-doped carbon nanocages via synergistic protecting-etching strategy for ultrahigh microwave absorption. Adv. Funct. Mater. 31(27), 2102812 (2021). https://doi.org/10.1002/adfm.202102812
  51. F. Niu, J. Yang, N. Wang, D.P. Zhang, W.L. Fan et al., MoSe2-covered N, P-doped carbon nanosheets as a long-life and high-rate anode material for sodium-ion batteries. Adv. Funct. Mater. 27(23), 1700522 (2017). https://doi.org/10.1021/acsami.6b10143
  52. S.Y. Jeong, S. Ghosh, J.K. Kim, D.W. Kang, S.M. Jeong et al., Multi-channel-contained few-layered MoSe2 nanosheet/N-doped carbon hybrid nanofibers prepared using diethylenetriamine as anodes for high-performance sodium-ion batteries. J. Ind. Eng. Chem. 75, 100–107 (2019). https://doi.org/10.1016/j.jiec.2019.03.007
  53. A. Apte, K. Mozaffari, F.S. Samghabadi, J.A. Hachtel, L. Chang et al., 2D electrets of ultrathin MoO2 with apparent piezoelectricity. Adv. Mater. 32(24), 2000006 (2020). https://doi.org/10.1002/adma.202000006
  54. A. Eftekhari, Molybdenum diselenide (MoSe2) for energy storage, catalysis, and optoelectronics. Appl. Mater. Today 8, 1–17 (2017). https://doi.org/10.1016/j.apmt.2017.01.006
  55. F. Zhang, Z.R. Jia, Z. Wang, C.H. Zhang, B.B. Wang et al., Tailoring nanops composites derived from metal-organic framework as electromagnetic wave absorber. Mater. Today Phys. 20, 100475 (2021). https://doi.org/10.1016/j.mtphys.2021.100475
  56. F.Y. Zeng, M.H. Yu, W.T. Cheng, W.X. He, Y. Pan et al., Tunable surface selenization on MoO2-based carbon substrate for notably enhanced sodium-ion storage properties. Small 16(41), 2001905 (2020). https://doi.org/10.1002/smll.202001905
  57. L.H. Meng, Y. Yao, J. Liu, Z. Wang, D. Qian et al., MoSe2 nanosheets as a functional host for lithium-sulfur batteries. J. Energy Chem. 47, 241–247 (2020). https://doi.org/10.1016/j.jechem.2020.02.003
  58. T.L. Xiong, J. Jia, Z.Q. Wei, L.L. Zeng, Y.Q. Deng et al., N-doped carbon-wrapped MoxC heterophase sheets for high-efficiency electrochemical hydrogen production. Chem. Eng. J. 358, 362–368 (2018). https://doi.org/10.1016/j.cej.2018.09.047
  59. M.L. Wang, Z.T. Sun, H.N. Ci, Z.X. Shi, L. Shen et al., Identifying the evolution of selenium-vacancy-modulated MoSe2 precatalyst in lithium-sulfur chemistry. Angew. Chem. Int. Ed. 60(46), 24558–24565 (2021). https://doi.org/10.1002/anie.202109291
  60. T.B. Zhao, Z.R. Jia, Y. Zhang, G.L. Wu, Multiphase molybdenum carbide doped carbon hollow sphere engineering: The superiority of unique double-shell structure in microwave absorption. Small 19(6), 2206323 (2023). https://doi.org/10.1002/smll.202206323
  61. X.C. Zhang, X. Zhang, H.R. Yuan, K.Y. Li, Q.Y. Ouyang et al., CoNi nanops encapsulated by nitrogen-doped carbon nanotube arrays on reduced graphene oxide sheets for electromagnetic wave absorption. Chem. Eng. J. 383, 123208 (2019). https://doi.org/10.1016/j.cej.2019.123208
  62. C.X. Wang, Y. Liu, Z.R. Jia, W.R. Zhao, G.L. Wu, Multicomponent nanops synergistic one-dimensional nanofibers as heterostructure absorbers for tunable and efficient microwave absorption. Nano-Micro Lett. 15(1), 13 (2023). https://doi.org/10.1007/s40820-022-00986-3
  63. M. Chang, Q.Y. Li, Z.R. Jia, W.R. Zhao, G.L. Wu, Tuning microwave absorption properties of Ti3C2Tx MXene-based materials: Component optimization and structure modulation. J. Mater. Sci. Technol. 148, 150–170 (2023). https://doi.org/10.1016/j.jmst.2022.11.021
  64. S.T. Gao, Y.C. Zhang, X.Z. Zhang, F.C. Jiao, T. Liu et al., Synthesis of hollow ZnFe2O4/residual carbon from coal gasification fine slag composites for multiband electromagnetic wave absorption. J. Alloys Compd. 952, 170016 (2023). https://doi.org/10.1016/j.jallcom.2023.170016
  65. S.T. Gao, Y.C. Zhang, J. He, X.Z. Zhang, F.C. Jiao et al., Coal gasification fine slag residual carbon decorated with hollow-spherical Fe3O4 nanops for microwave absorption. Ceram. Int. 49(11), 17554–17565 (2023). https://doi.org/10.1016/j.ceramint.2023.02.122
  66. X.F. Zhou, Z.R. Jia, A.L. Feng, X.X. Wang, J.J. Liu et al., Synthesis of fish skin-derived 3D carbon foams with broadened bandwidth and excellent electromagnetic wave absorption performance. Carbon 152, 827–836 (2019). https://doi.org/10.1016/j.carbon.2019.06.080
  67. Y. Liu, X.F. Zhou, Z.R. Jia, H.J. Wu, G.L. Wu, Oxygen vacancy induced dielectric polarization prevails in the electromagnetic wave-absorbing mechanism for Mn-based MOFs-derived composites. Adv. Funct. Mater. 32(34), 2204499 (2022). https://doi.org/10.1002/adfm.202204499
  68. T.T. Pajkossy, R. Jurczakowski, Electrochemical impedance spectroscopy in interfacial studies. Curr. Opin. Electrochem. 1(1), 53–58 (2017). https://doi.org/10.1016/j.coelec.2017.01.006
  69. Z.R. Jia, X.Y. Zhang, Z. Gu, G.L. Wu, MOF-derived Ni-Co bimetal/porous carbon composites as electromagnetic wave absorber. Adv. Compos. Hybrid Mater. 6(1), 28 (2023). https://doi.org/10.1007/s42114-022-00615-y
  70. S. Zhang, Z.R. Jia, Y. Zhang, G.L. Wu, Electrospun Fe0.64Ni0.36/MXene/CNFs nanofibrous membranes with multicomponent heterostructures as flexible electromagnetic wave absorbers. Nano Res. 16(2), 3395–3407 (2023). https://doi.org/10.1007/s12274-022-5368-1
  71. C.B. Liang, H. Qiu, Y.L. Zhang, Y.Q. Liu, J.W. Gu, External field-assisted techniques for polymer matrix composites with electromagnetic interference shielding. Sci. Bull. 68, 1938 (2023). https://doi.org/10.1016/j.scib.2023.07.046
  72. S.J. Zhang, Z.R. Jia, B. Cheng, Z.W. Zhao, F. Lu et al., Recent progress of perovskite oxides and their hybrids for electromagnetic wave absorption: a mini-review. Adv. Compos. Hybrid Mater. 5(3), 2440–2460 (2022). https://doi.org/10.1007/s42114-022-00458-7
  73. X.L. Cao, Z.R. Jia, D.Q. Hu, G.L. Wu, Synergistic construction of three-dimensional conductive network and double heterointerface polarization via magnetic FeNi for broadband microwave absorption. Adv. Compos. Hybrid Mater. 5, 1030–1043 (2022). https://doi.org/10.1007/s42114-021-00415-w
  74. Y. Liu, X.H. Liu, X.Y. Eu, B.B. Wang, Z.R. Jia et al., Synthesis of MnxOy@C hybrid composites for optimal electromagnetic wave absorption capacity and wideband absorption. J. Mater. Sci. Technol. 103, 157–164 (2022). https://doi.org/10.1016/j.jmst.2021.06.034
  75. X.F. Zhou, Z.R. Jia, X.X. Zhang, B.B. Wang, X.H. Liu et al., Electromagnetic wave absorption performance of NiCo2X4 (X = O, S, Se, Te) spinel structures. Chem. Eng. J. 420, 129907 (2021). https://doi.org/10.1016/j.cej.2021.129907
  76. S.J. Zhang, J.Y. Li, X.T. Jin, G.L. Wu, Current advances of transition metal dichalcogenides in electromagnetic wave absorption: a brief review. Int. J. Miner. Metall. Mater. 30(3), 428–445 (2023). https://doi.org/10.1007/s12613-022-2546-9
  77. L.G. Ren, Y.Q. Wang, X. Zhang, Q.C. He, G.L. Wu, Efficient microwave absorption achieved through in situ construction of core-shell CoFe2O4@mesoporous carbon hollow spheres. Int. J. Miner. Metall. Mater. 30(3), 504–514 (2023). https://doi.org/10.1007/s12613-022-2509-1
  78. H.X. Zhang, K.G. Sun, K.K. Sun, L. Chen, G.L. Wu, Core-shell Ni3Sn2@C ps anchored on 3D N-doped porous carbon skeleton for modulated electromagnetic wave absorption. J. Mater. Sci. Technol. 158, 242–252 (2023). https://doi.org/10.1016/j.jmst.2023.01.053
  79. C.H. Wei, M.K. He, M.Q. Li, X. Ma, W.L. Dang et al., Hollow Co/NC@MnO2 polyhedrons with enhanced synergistic effect for high-efficiency microwave absorption. Mater. Today Phys. 36, 101142 (2023). https://doi.org/10.1016/j.mtphys.2023.101142
  80. J.X. Zhou, D. Lan, F. Zhang, Y.H. Cheng, Z.R. Jia et al., Self-assembled MoS2 cladding for corrosion resistant and frequency-modulated electromagnetic wave absorption materials from X-band to Ku-band. Small (2023). https://doi.org/10.1002/smll.202304932
  81. L.L. Liang, Z. Liu, L.J. Xie, J.P. Chen, H. Jia et al., Bamboo-like N-doped carbon tubes encapsulated CoNi nanospheres towards efficient and anticorrosive microwave absorbents. Carbon 171, 142–153 (2021). https://doi.org/10.1016/j.carbon.2020.08.057
  82. X.F. Xu, S.H. Shi, Y.L. Tang, G.Z. Wang, M.F. Zhou et al., Growth of NiAl-layered double hydroxide on graphene toward excellent anticorrosive microwave absorption application. Adv. Sci. 8(5), 2002658 (2021). https://doi.org/10.1002/advs.202002658
  83. S.Z. Li, L. Ma, Z.X. Lei, A. Hua, A.Q. Zhang et al., Bifunctional two-dimensional nanocomposite for electromagnetic wave absorption and comprehensive anti-corrosion. Carbon 186, 520–529 (2021). https://doi.org/10.1016/j.carbon.2021.10.055
  84. Y. Wang, X.C. Di, J. Chen, L.N. She, H.G. Pan et al., Multi-dimensional C@NiCo-LDHs@Ni aerogel: Structural and componential engineering towards efficient microwave absorption, anti-corrosion and thermal-insulation. Carbon 191, 625–635 (2022). https://doi.org/10.1016/j.carbon.2022.02.016
  85. B.R. Hinderliter, S.G. Croll, D.E. Tallman, Q. Su, G.P. Bierwagen, Interpretation of EIS data from accelerated exposure of coated metals based on modeling of coating physical properties. Electrochim. Acta 51(21), 4505–4515 (2006). https://doi.org/10.1016/j.electacta.2005.12.047
  86. X.W. Liu, J.P. Xiong, Y.W. Lv, Y. Zuo, Study on corrosion electrochemical behavior of several different coating systems by EIS. Prog. Org. Coat. 64(4), 497–503 (2009). https://doi.org/10.1016/j.porgcoat.2008.08.012
  87. C.L. Zheng, M.Q. Ning, Z. Zou, G.G. Lv, Q. Wu et al., Two birds with one stone: broadband electromagnetic wave absorption and anticorrosion performance in 2–18 GHz for Prussian blue analog derivatives aimed for practical applications. Small (2023). https://doi.org/10.1002/smll.202208211
  88. X.Y. Zhang, Z.R. Jia, F. Zhang, Z.H. Xia, J.X. Zou et al., MOF-derived NiFe2S4/porous carbon composites as electromagnetic wave absorber. J. Colloid Interface Sci. 610, 610–620 (2022). https://doi.org/10.1016/j.jcis.2021.11.110
  89. X.F. Zhou, Z.R. Jia, X.X. Zhang, B.B. Wang, W. Wu et al., Controllable synthesis of Ni/NiO@porous carbon hybrid composites towards remarkable electromagnetic wave absorption and wide absorption bandwidth. J. Mater. Sci. Technol. 87, 120–132 (2021). https://doi.org/10.1016/j.jmst.2021.01.073
  90. X.F. Zhou, C.H. Zhang, M. Zhang, A.L. Feng, S.L. Qu et al., Synthesis of Fe3O4/carbon foams composites with broadened bandwidth and excellent electromagnetic wave absorption performance. Compos. Part A Appl. Sci. Manuf. 127, 105627 (2019). https://doi.org/10.1016/j.compositesa.2019.105627
  91. X.M. Huang, X.H. Liu, Z.R. Jia, B.B. Wang, X.M. Wu et al., Synthesis of 3D cerium oxide/porous carbon for enhanced electromagnetic wave absorption performance. Adv. Compos. Hybrid Mater. 4, 1398–1412 (2021). https://doi.org/10.1007/s42114-021-00304-2
  92. J. Wang, X.Y. Lin, R.X. Zhang, Z.Y. Chu, Z.Y. Huang, Transition metal dichalcogenides MX2 (M=Mo, W; X=S, Se, Te) and MX2-CIP composites: promising materials with high microwave absorption performance. J. Alloys Compd. 743, 26–35 (2018). https://doi.org/10.1016/j.jallcom.2018.01.118
  93. G.Q. Yu, M.Q. Ye, A.J. Han, Q.Z. Liu, Y.J. Su et al., Optimization of electromagnetic wave absorption properties of CoNi/MoSe2 composites with 3D flower-like by controlling the Co/Ni molar ratio. J. Alloys Compd. 939, 168592 (2023). https://doi.org/10.1016/j.jallcom.2022.168592
  94. X.Y. Fu, Q. Zheng, L. Li, M.S. Cao, Vertically implanting MoSe2 nanosheets on the RGO sheets towards excellent multi-band microwave absorption. Carbon 197, 324–333 (2022). https://doi.org/10.1016/j.carbon.2022.06.037
  95. A.K. Darboe, X.S. Qi, X. Gong, Q. Peng, Y.L. Chen et al., Constructing MoSe2/MoS2 and MoS2/MoSe2 inner and outer-interchangeable flower-like heterojunctions: A combined strategy of interface polarization and morphology configuration to optimize microwave absorption performance. J. Colloid Interface Sci. 624, 204–218 (2022). https://doi.org/10.1016/j.jcis.2022.05.078
  96. X.Z. Tang, Z.J. Liao, H.L. Shi, R. Wang, J.L. Yue et al., MoSe2 nanosheets decorated Co/C fibrous composite towards high efficiency electromagnetic wave absorption. Compos. Part A Appl. Sci. Manuf. 163, 107169 (2022). https://doi.org/10.1016/j.compositesa.2022.107169
  97. Y. Hong, Y. Liu, J.Z. Wu, Y. Li, X.H. Wu, Enhanced tunability of broadband microwave absorption for MoSe2/FeSe2 nanocomposites with a unique heterostructure. Ind. Eng. Chem. Res. 61(17), 5807–5815 (2022). https://doi.org/10.1021/acs.iecr.1c04962
Read More
Author biographies are not available.
Download this PDF file
PDF SUPPLEMENTARY FILE
Statistic
Read Counter : 3471 Download : 2587

Most read articles by the same author(s)

1 2 > >>